2025 messages,
Last post on May 23, 2013 at 6:02 PM
You are in the
Dodge Ram-2010 and older Forum.
What is this discussion about?
Dodge Ram Pickup 1500, Dodge Ram Pickup 2500, Dodge Ram Pickup 3500, Transmission, Truck
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#815 of 2025 1999 Dodge Ram 1500-series pickup 5.9L 360 Engine
by 99dodge1
Jan 25, 2009 (7:30 am)
This truck has about 119k miles on it and i hear this tapping sound and took it to pep Boys because i had problems with my brakes but the mechanic said the tapping noice is a transmission problem and that i need to have it looked at. I have never had problems with the transmission or the engine so i think 119k is good since i treat it like a 4x4 when its not one LOL. The main question is, is it possible to put a 2009 transmission and engine inside of a 1999 Dodge truck ? I figure it be better to have a newer engine in there to get better gas mileage since it would be newer or what would ya`ll think?
#816 of 2025 96 dodge ram 2500 4x4 v10
by jamie45724
Jan 25, 2009 (8:53 pm)
transmission work great till i stopped driving it now it takes of in 2nd gear when in drive but when i pull it in low gear it works fine
Jan 26, 2009 (12:40 pm)
My stick on the floor has always worked for me. ( 1995 1500) then it slowly got slower to have it in gauge in to 4 wheel . Then it got to the point of not responding at all. I drained fluid and filled , checked all plug in connectors .
Is anyone out there that can give me a hint as to the problem.
Steve
Jan 27, 2009 (12:08 am)
Please help , we have snow coming. The stick on the floor is not shifting into 4
wheel . Why ? Does anyone know ?
#819 of 2025 Re: 4x4 not working [4x44dummie]
by kcram HOST
Jan 27, 2009 (9:45 pm)
Since this got slower and slower over time, you probably want to check the CAD (central axle disconnect) system at the front axle for malfunction or a vacuum leak.
kcram - Pickups/Wagons Host
#820 of 2025 Re: 4x4 not working [kcram]
by flash46
Jan 27, 2009 (10:30 pm)
I agree as I encountered a very similar issue with my 01' 4x4. The vacuum loss was so pronounced that the cruise control, a/c vents, and willingness to engage into 4x4 was affected by a torn vacuum line on the right front hub. Replaced hose with OEM hose (very important) and all started working proper. Hope this helps.
#821 of 2025 1994 Ram 1500 4x2 5.2L
by ShadyJr
Jan 28, 2009 (8:04 am)
I recently replaced the tranny in my 94 ram, The problem I am having is no overdrive and the speedometer is'nt working, Both worked fine until I swapped trannys. I used the speed sensor out of old tranny which was new and also solenoid out of old tranny which was new. The trans shifts beautiful through 3rd gear but no overdrive and no speedometer now! Any ideas on the problem? Thanks!
#822 of 2025 Re: 4x4 not working [kcram]
by 4x44dummie
Jan 28, 2009 (8:44 am)
thank you ,I got another feedback that said the same thing. I will look today considering we just got 8" of snow... If it is not the problem , you are going to buy it right. Steve
#823 of 2025 2001 Dodge Ram 2500 tranny problem
by tnickell85
Jan 31, 2009 (5:25 am)
Hi i have a 2001 ram 2500 with the 5.9 turbo cummins. When i punch the gas in first gear, my tranny wont shift into second. The rpms will just redline until i let off of the gas. Other than that the tranny is solid, i just cant understand why it wont shift into 2nd gear if i get on the gas. I appreciate any input, thx in advance.
#824 of 2025 2003 Diesel won't Down Shift
by cmeadows
Feb 01, 2009 (3:43 pm)