- #806 of 1255
-
Re: Stupid Trannie [dustyk]
by MikaybiZ
-
Jan 11, 2009 (2:25 pm)
-
|
|
Replying to: dustyk (Jan 11, 2009 12:42 pm)
As a matter of fact it is, the odd thing is I had this trannie replaced in Utah in October and the drove to Alabama at the beginning of November without a problem. It wasn't until recently that it started acting up. The most notable problem has been it shifting itself out of overdrive and not letting me put back into overdrive. Even with the check engine light it seems to be driving okay, I would rather not press my luck and be stuck somewhere. Also has anybody had any problems with their dashboard basically fall apart? If so what can I do? I it a pain to replace by myself? I'm not Mr. Goodwrench by any means but I can do some basic stuff. By the way thanks for your help Dusty.
Mike
|
- #807 of 1255
-
Re: 02 Ram 1500 4x4 5.9 Quadcab Rumble Bee [gotterdone4u]
by inknthread
-
Jan 11, 2009 (9:42 pm)
-
|
|
Replying to: gotterdone4u (Oct 23, 2008 6:31 am)
How expensive was this to fix. I think the same thing happened to me today. Thanks
|
- #808 of 1255
-
2000 Dodge ram problems
by Wando
-
Jan 14, 2009 (7:17 pm)
-
|
|
while driving it "quit" moving... thought was low on tranny fluid but that didnt help.... rpms got up to 3000 and was barely moving... 2 months ago had to change oxygen sensor ...HELP>>>>>>
|
- #809 of 1255
-
Re: Stupid Trannie [MikaybiZ]
by dustyk
-
Jan 17, 2009 (11:31 am)
-
|
|
Replying to: MikaybiZ (Jan 11, 2009 2:25 pm)
I just seem to think that the 47RE might have been available as an option, specifically on certain 4x4 versions, whether part of an off-road package or something like that. I cannot find any thing documented that verifies that, however.
On the previous generation RAMs (pre-2002), splits in the dashboard were a problem, although I know of a lot of RAMs of that vintage that have not had the problem. I was told by a Dodge service manager that this problem was traced to a molding-related defect and that's why it affected only certain vehicles. I think I heard that, based on how good your relationship is with the dealer, that they can help you get some financial assistance from Chrysler on a portion or all of the repair.
Regards,
Dusty
|
- #810 of 1255
-
Re: Stupid Trannie [dustyk]
by MikaybiZ
-
Jan 17, 2009 (6:17 pm)
-
|
|
Replying to: dustyk (Jan 17, 2009 11:31 am)
You may be right Dusty my model is a 4x4 and also the sport off road package, it must have been an option for that model. I took it back to the shop for another look hopefully they find something because this is getting old. As for the dash I have done some looking around on the web and found a place that is selling it for around a hundred bucks. Looks like a good deal but we will see. I only hope that I'm not biting off more than I can chew putting it in myself. Thanks again Dusty.
Mike
|
- #811 of 1255
-
2005 dodge ram 1500 slt issues
by OmegaGhost86
-
Jan 17, 2009 (6:38 pm)
-
|
I have a few questions that maybe someone on here could help me with I have a 05 ram with the normal v8 in it not the hemi with about 60k miles on it the service engine light just came on and for the past week before the light came on everytime i try to put the truck in gear from park like from park to drive it just sits there the rpms will build up but the truck goes no where. Ill put the truck back in park then back to drive again it will do the same thing then suddenly violantly jerk itself into gear after that the seems to almost shake and the engine seems like its trying alot harder then it should be im current on all my oil changes and all that stuff i looked at fluids there all good and where there supposed to be im out of warrnty and i have an appt for monday to bring it in i was just curious if someone might know what the heck it is before i get told that i have 20 random things wrong with my truck?
Steven
|
- #812 of 1255
-
Re: 2006 Ram Quad Cab transmision sliping [sluggo333]
by OmegaGhost86
-
Jan 17, 2009 (6:42 pm)
-
|
|
Replying to: sluggo333 (Nov 01, 2006 10:16 am)
my trucks doing the same thing except the weather is warm and dry mines an 05 reg cab with the 4 liter
|
- #813 of 1255
-
Re: 2006 Ram Quad Cab transmision sliping [OmegaGhost86]
by bobd888
-
Jan 18, 2009 (5:45 pm)
-
|
|
Replying to: OmegaGhost86 (Jan 17, 2009 6:42 pm)
My 2000 Ram P/U was doing same thing a couple years ago. It went away after replacing the two speed sensors in the transmission. It just started happening again (odo=120K). I'm considering replacing the transmission, but am wondering what else will go wrong after sinking almost $3K for the job. Any suggestions?
|
- #814 of 1255
-
Re: 1998 RAM 24 valve won't stay in lock-up [rrhnz1]
by Newtomopar
-
Jan 18, 2009 (6:44 pm)
-
|
|
Replying to: rrhnz1 (Jan 11, 2009 1:13 pm)
I bit the bullet and took the truck back to the dealer, paid the $100 diagnostics fee and they found that my ecm needed an update. Up dated now and drives perfect. Thanks for all the suggestions from everyone, I tried everything and would have never found the actual problem.
|
- #815 of 1255
-
1999 Dodge Ram 1500-series pickup 5.9L 360 Engine
by 99dodge1
-
Jan 25, 2009 (6:30 am)
-
|
|
Replying to: Newtomopar (Jan 18, 2009 6:44 pm)
This truck has about 119k miles on it and i hear this tapping sound and took it to pep Boys because i had problems with my brakes but the mechanic said the tapping noice is a transmission problem and that i need to have it looked at. I have never had problems with the transmission or the engine so i think 119k is good since i treat it like a 4x4 when its not one LOL. The main question is, is it possible to put a 2009 transmission and engine inside of a 1999 Dodge truck ? I figure it be better to have a newer engine in there to get better gas mileage since it would be newer or what would ya`ll think?
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups 
