Sign In Join 



Dodge Ram Transmission Problems

1286 messages,  Last post on Dec 06, 2009 at 8:37 PM

You are in the Dodge Ram Forum. Your Host is kcram

What is this discussion about? Dodge Ram Pickup 1500, Dodge Ram Pickup 2500, Dodge Ram Pickup 3500, Transmission, Truck


Messages Page 122 of 129
1
...
119
120
121
122
123
124
125
...
129
Prev
Next
Last
Go To Msg #
Search This Discussion

#1211 of 1286
Trouble code 1762 on a 2001 dodge 3500 Diesel Engine by kpnmc
Oct 02, 2009 (2:10 pm)
Reply
Diagnostic trouble code reads 1762. My Haynes Repair Manual book doesn't say what to do with this diagnostic trouble code. The scaner say it something to do with the transmission. Can anyone help me?
#1212 of 1286
Re: Trouble code 1762 on a 2001 dodge 3500 Diesel Engine [kpnmc] by dieselkc
Oct 02, 2009 (8:57 pm)
Reply

Replying to: kpnmc (Oct 02, 2009 2:10 pm)

Don't quote me on this but if my memory serves me correct that code is for low line pressure. Could be the solenoid on the bottom of the valve body (the one that hangs down into the pan or it's related sensor? Get it looked at. Dartboard diagnostics get expensive and may not fix your problem. My truck threw that code and it turned out to be the 2nd gear shift solenoid. Unfortunately that solenoid that failed on mine is combined with the 1st gear shift solenoid and shares a common wire harness. $400 ouch! Like I said that code can mean several different posible faulty parts so get it looked at and isolate your exact bad part or parts.
 
Cheers, Casey
#1213 of 1286
reverse 99 dodge ram 1500 pickup by thewanderer
Oct 03, 2009 (6:11 pm)
Reply
Sometimes when I put it in reverse there is a loud growling noise, I can sometimes put it then into neutral and back into reverse and it will stop. Why is this? How can I correct it?
#1214 of 1286
auto tranny problems 97 1500 5.2 by big_dodge
Oct 04, 2009 (7:33 pm)
Reply
Hey new to the forums.. Really just trying to figure this out, found this forum but anyway, i can shift into any gear perfectly as in d p r n 1 2. i put it in drive and it moves same with all the other gears. while driving it occasionally has trouble shifting out of fist. when it has trouble it just goes to high rpm and then shifts. same with second gear but is mire frequent. i usually cant get out of second gear but sometimes do. while driving it has automatically shifted into nuetral but when i stop i have to shift from d to n and back to d for it to engage again. please help i dont have money to replace tranny
#1215 of 1286
Tranny Woes by thordude
Oct 06, 2009 (10:18 am)
Reply
hey Guys, I've got a real problem with my truck. Here goes..I have a '03 3500 4x4 that I purchased for my hotshot company. I bought the truck used in '07 with 25,000 miles. Thinking that this unit was almost new. At 75,000 miles the original 5 spd manual tranny gave up on me. Chewing both upper shaft and lower shaft front gear teeth. Really ugly inside. Okay, had Dodge replace with new, 13,000 miles later...same thing. I had that tranny rebuilt, Dodge would not warranty the 2nd. Two months later, I lost 5th in Louisiana and then drove it home. Okay, I heard the NV5600 6spd is good for a 2 ton truck. So, $5,500.00 later the truck was converted to the 6spd. That lasted, 1 month and now has the 6th tranny in the truck. At this time, I am now starting to have problems with the truck again. I quit my business due to repair cost. What the heck is going on !?! I can not find anybody who can tell me why this has happened to my truck...i.e. me. Can you help? Thanks
#1216 of 1286
Tranny Woes #2 by thordude
Oct 06, 2009 (10:49 am)
Reply
I bet one of your questions is what are you pulling? My trailer is 40ft x 102" dove tail, goose neck hitch. The trailer weighs around 8100 lbs. The load weights varied with the average around 10,000lbs. Now, I bet you're going to say that the truck is at its limit for weight...explain to me, why are there trucks here that pull a 32' cattle trailer, 7 days a week, fully loaded running up and down the road as fast as they can pull and not having problems?
#1218 of 1286
tranny slips out of gear by tboshart
Oct 07, 2009 (9:05 am)
Reply
i have a2000 Ram 1500 , going down the road 55-60 the tranny slips out and acts like its in low gear any thoughts whats going on
#1219 of 1286
any clue? by flyinshu
Oct 08, 2009 (5:46 pm)
Reply
I have a 2008 ram 1500 with the m/d hemi...not sure of the tranny model, but it is an automatic. the problem I am having is every once in a while, I will lose overdrive, when I stop and try to go...the tranny slips. If I shift from reverse and back to drive...no fix. the only way to fix it is to shut off the engine and restart. then everything works fine again. I even tried shifting through the tow/haul and overdrive off selection, but the only fix is a restart. could not get any codes from my code reader...ideas?
#1220 of 1286
1500 ram ,stalling motor by is72
Oct 08, 2009 (6:36 pm)
Reply
I purchased my 01 ram 1500- (5.9) 4x4 /125000 , about 4weeks ago,it drove fine at fisrt, but then it started to slip,from 1 to 2. i did check the fluid and i was low, so i filled it with atf+4,did not fix the problem,so i dropped the pan and change the filter and fluid atf+4,that did not fix the problem and on top of that i got a ( trans temp ) light on the dash,i trew some lucas in it, and now every time i shitf in gear drive or reverse it kill the motor,to the point that its not driveble, did I mess my trans up???? any comments

Messages Page 122 of 129
1
...
119
120
121
122
123
124
125
...
129
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement