Last post on Nov 28, 2013 at 5:35 AM
You are in the Dodge Ram-2010 and older
What is this discussion about?
Dodge Ram Pickup 1500, Dodge Ram Pickup 2500, Dodge Ram Pickup 3500, Transmission, Truck
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#2047 of 2056 Re: 1995 RAM P/U 3500 4X4 [thumper2010]
Nov 05, 2013 (11:23 am)
Do u by chance know the part numbers for the Gov solenoid and sensor...or could u send me a link for those parts. Having the same problem with my 99 Ram. By the way did the problem ever come back ?
#2048 of 2056 Re: 2001 Dodge Ram transmission problem (Help) [dpstroup]
Nov 06, 2013 (8:40 am)
I am having the same exact problem as you were having. The transmission is working well in all gears except for reverse. When I give it gas it slowly reverses but not as it should...spudders almost.
What did you end up doing to correct that problem?
I would appreciate any feedback!
#2049 of 2056 Reverse in Transmission Stalling out
Nov 06, 2013 (8:49 am)
I have a 2002 dodge ram 2WD 5.9L
I was driving the other day and the rear seal of my transmission went out. I was unaware of this until I got home and so naturally I replace the rear seal and dropped the pan to replace the filter and pan seal. Proceeded to put new ATF+4 in and now the reverse is sputtering and very un-responsive when i give it gas. The other gears work fine but reverse is just out for some reason.
Any help here would be greatly appreciated.
#2050 of 2056 Re: 1997 Ram 2500 4x4 no reverse [seancanfixit]
Nov 06, 2013 (8:53 am)
Hey man I am having the same problem right now. Curious to see what you found out? Thanks
#2051 of 2056 Re: Reverse in Transmission Stalling out [lumberjack777]
Nov 06, 2013 (8:59 am)
#2052 of 2056 Re: Reverse in Transmission Stalling out [lumberjack777]
Nov 06, 2013 (9:00 am)
I had to redo the tranny 3rd was out.
#2053 of 2056 Re: 2001 Dodge Ram transmission problem (Help) [lumberjack777]
Nov 07, 2013 (4:44 am)
Sounds like a broken snap ring in the overdrive unit. Check for pieces of the ring in the trans oil pan.
#2054 of 2056 Re: 2001 Dodge Ram transmission problem (Help) [circuitryder]
Nov 07, 2013 (9:07 am)
Thanks man I just finished pulling that apart and sure enough there were two small pieces of a ring that were being held by the magnet. What do I need to order and replace now?
#2055 of 2056 2005 Dodge Ram 1500 5.7 4X4
Nov 20, 2013 (9:36 am)
I've been having problems with the transmission. When I'm in third gear and let off the gas, I start hearing a knock at my feet like something is loose. Can anyone help me out here?
#2056 of 2056 02 dodge ram 1500 tranny problems
Nov 28, 2013 (5:35 am)
Hi i have a 2002 dodge ram 1500 sport 5.9L 4x4 46re tranny. I have put 2 trannies in the truck. The first one, the check ball valve on the line set that goes from the tranny to the cooler got stuck and my overdrive went out and blew tranny fluid out of the torque converter. Got codes for torque converter, governor senser. Bought new tranny with 3 yr unlimited miles for 1500 bucks. Took out the check ball valve, put new tranny cooler, put inline tranny filter. Tranny worked awesome, shifted nicely, drove awesome. Let it sit for 3-4 weeks, now, when taking off, truck will go from first to 3rd then 4th at like 20mph, skips second gear. When i come to a stop sign, tranny won't down shift properly, gets stuck in what ever gear. Almost kills the engine, truck shakes like crazy, then right before i come to a complete stop, it down shifts to first. Got no codes coming up. If i put it in 2nd, before i come to a stop, tranny down shifts perfect. Over drive off not working. When im taking off i hear a winding noise. when i put it reverse, hear a grinding winding noise. I put new tps, cause when i had the pedal all the way to the floor, tranny didn't want to down shift. Put new and now it down shift when im at 40 and going up a hill. I called the tranny people for warranty, there sending me a new tranny. What might caused this? The tranny only had 3000 miles. I don't want this to happen to the next one. getting tired of taking out and putting new..