Sign In Join 



Nissan Pathfinder Key to be reprogrammed

13 messages,  Last post on Sep 11, 2009 at 5:36 PM

You are in the Nissan Pathfinder Forum. Your Hosts are steve_ & tidester

What is this discussion about? Nissan Pathfinder, SUV


Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion

#4 of 13
Re: Replacement Key Question by jnilsestuen
Dec 26, 2006 (7:08 pm)
Reply

Replying to: kmk (Aug 22, 2006 3:51 pm)

I have an '01 Pathfinder SE. I just lost one of my two keys and want to purchase another spare. Is there any way to do this other than paying the dealer? I see key blanks for sale at several online locations but am not clear what is then required to get the key cut and programmed. Do I have to head to a dealer for programming no matter where I buy the key? Any advice would be appreciated.
 
Thanks,
#5 of 13
Re: Replacement Key Question [jnilsestuen] by maximalou
Jan 17, 2007 (6:56 am)
Reply

Replying to: jnilsestuen (Dec 26, 2006 7:08 pm)

When I purchased my 2000 pathy in December '05 I had the same problem. I bought it from a dealer and he reprogramed the key. Haven't had any problems since then.
 
Louie
#6 of 13
Re: Key to be reprogrammed [chris67] by meinwa
Apr 19, 2007 (7:28 pm)
Reply

Replying to: chris67 (Nov 17, 2006 4:14 pm)

I bought a new '06 a month ago. Two days into owning it, and it won't start. I took it back to the dealer, and had the keys reprogrammed, and haven't had any trouble...until now, a month later.
I was told previously that if reprogramming the keys didn't work, then the computer was going to be replaced. I guess I'll find out what's going to happen tomorrow, when I take it back to the dealer.
#8 of 13
1995 Pathfinder Keyless Entry reprogram by jkow3
May 01, 2007 (8:33 am)
Reply
I have been to dozens of online forums that talk about how to reprogram your keyfobs and I believe I am attempting it correctly. Steps: Turn key to ON position, then back OFF. Locate box under drivers seat, push and hold down button until you get the 5 bursts. You hear a series of beeps. Press your LOCK/UNLOCK button on keyfob. This associates the 2 devices. Turn key ON then OFF again. I actually get a response from the BOX when I hit the button on my keyfob, but it still will not work. It leads me to believe I am doing it right, but there is some kind of problem with the remote BOX.
#9 of 13
Re: Key to be reprogrammed [chris67] by kalanie
Jul 16, 2008 (8:05 am)
Reply

Replying to: chris67 (Nov 17, 2006 4:14 pm)

I was having the same problem with my 2005 350z. I took it to the dealer where I bought the car and they said they have to reprogram the keys and will take an hour and half. Still under warranty but they said that is not covered under the warranty. I have to pay $50. Not a lot of $ but I bought the car in 06 and the sales peolple probably lost the keys.
#10 of 13
leaving a key in the ignition off and then remote start by 99accent
Sep 02, 2009 (11:36 am)
Reply
I have a remote start after market on my 2003 pathfinder if a transponder key was left in the ignition by mistake in the OFF POSTION, will my remote star still start the car or will it somehow confuse the system seeing 2 keys one in the remote start under the dash in the little box where they use an extra key for the remote start?
#11 of 13
cloning a transponder key by 99accent
Sep 07, 2009 (1:05 pm)
Reply
I have a 2003 Nissan pathfinder with one key, I called ace hardware and they said they can clone a key with there computer by getting the code then copy the code into a new transponder key. ,I also asked if they could possibly by mistake erase my one good key ,they claim they have done this for many chip type keys without any problems,is this true?
#12 of 13
FLASHING THE PATHFINDERS COMPUTER by 99accent
Sep 11, 2009 (5:30 pm)
Reply
what are they doing when they flash a cars computer,I herd they have to do this when you loose your last key
#13 of 13
is this oil level ok by 99accent
Sep 11, 2009 (5:36 pm)
Reply
my manual for my pathfinder says to add 5 1/4 qts of oil with a new filter, I changed my oil last week and just put 5 qts in ran it shut it off and checked the dip stick and it showed maybe 1/8th inch over the full mark not much, will it be ok,and its the 2003 VQ35DE V6.

Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement