Last post on Nov 24, 2010 at 11:19 AM
You are in the Toyota Camry
What is this discussion about?
Toyota Camry, Auto Repair, Sedan
#35 of 41 Re: 2002 Camry suspension [nycamry]
Jan 10, 2010 (6:22 pm)
I have a 1995 and did that very thing last year... actually, all four of the struts. It ran me almost $1,100 all told, but it was well worth it. The car rides like new again, afterward. Prior to this, it was bouncing a lot, and the tires were getting eaten up prematurely.
#36 of 41 Camry cruise control problems
Jan 10, 2010 (6:31 pm)
Has anybody had experience troubleshooting cruise controls on the older Camrys? I have a 1995 which is still a sweet car, but the cruise fails intermittently. The dash light comes on, but when you try to engage, it may or may not do so. If it's not going to, the light blinks 5 times and shuts off. Turning off the car resets it, and it may or may not work next time.
This problem has been getting more frequent over the past few years, to the point that it now only works infrequently. The Toyota garage has looked at it but has no clue, they say I would have to "come it with it not working" -- and how likely is THAT to happen? It sounds like it might be some weak relay that could be replaced, or maybe even a leaky vacuum hose -- as opposed to their suggested solution of replacing the entire unit, to the tune of $1,200, which MAY fix the problem, if the problem is not the computer module rather than the cruise.
#37 of 41 Re: Camry cruise control problems [djroff]
Jan 10, 2010 (7:50 pm)
Actually, you might want to try the Older Camry Maintenance and Repair discussion. You might be able to turn up something related using the search, but if not, that's a more likely place for you to get some feedback on this.
Hope we can help!
#38 of 41 Re: Camry cruise control problems [djroff]
Jan 11, 2010 (4:58 am)
Speed sensor inspection:
(a) Connect the positive (+) lead from battery to terminal
1 and negative (–) lead to terminal 2.
(b) Connect the positive (+) lead from tester to terminal 3
and negative (–) lead to terminal 2.
(c) Revolve shaft.
(d) Check that there is voltage change from approx. 0 V
to 1 1 V or more between terminals 2 and 3.
HINT: The voltage change should be 4 times par each
revolution of the speed sensor shaft.
If operation is not as specified, replace the sensor.
If that is not the problem, verify that the switches turning the cruise on/off/set work correctly. Unplug it, and check operation with an omhmeter.
#39 of 41 Dashboard light
Nov 24, 2010 (11:02 am)
One of the dashboard light of my toyota camry 2010 is on. it is yellowish round light with a little gap at the top and small dots beneath with an exclamation sign in the centre. pls can somebody explain the meaning of this dashboard light?
#40 of 41 User Manual
Nov 24, 2010 (11:04 am)
Users guide for Toyota Camry 2010 to purchase or download free. Any suggestions?
#41 of 41 Re: Dashboard light [yowusu]
Nov 24, 2010 (11:19 am)
So you don't have the owners manual supplied in the glovebox?
Not sure, but I think if you go to www.toyota.com, you can download an owners manual.