You are here: Forums Sedans Chevrolet Malibu Chevrolet Malibu Start Up/Ignition

Chevrolet Malibu Start Up/Ignition

159 messages,  Last post on Nov 23, 2009 at 5:03 PM

You are in the Chevrolet Malibu Forum. Your Hosts are pat & karens

What is this discussion about? Chevrolet Malibu, Chevrolet Malibu SS, Engine, Sedan

Messages Page 15 of 16 1 ... 10 11 12 13 14 15 16 Prev Next Last

Go To Msg # Search This Discussion

#139 of 159 Re: Anti- Theft Secuirty System [gonogo] by autumn1014 May 21, 2008 (9:24 am)
Replying to: gonogo (May 21, 2008 8:27 am) What about just disconnecting the Harness - unplugging it?   There are no side effects or problems that can be caused if the Ant-Theft is not connected? Replies to this message: gonogo (May 22, 2008 8:07 am)
#140 of 159 Re: Anti- Theft Secuirty System [gonogo] by autumn1014 May 21, 2008 (9:28 am)
Replying to: gonogo (May 21, 2008 8:27 am) One more question, what kind of Resistor should I get? Replies to this message: gonogo (May 22, 2008 8:09 am)
#141 of 159 Re: Anti- Theft Secuirty System [autumn1014] by gonogo May 22, 2008 (8:07 am)
Replying to: autumn1014 (May 21, 2008 9:24 am) I just read up on my Passlock infor, One guy just unplugged it and it worked for him, but the security light stays on, it will if you cut the yellow wire too.
#142 of 159 Re: Anti- Theft Secuirty System [autumn1014] by gonogo May 22, 2008 (8:09 am)
Replying to: autumn1014 (May 21, 2008 9:28 am) This information came from another site.  Passlock System Well, I just bypassed one the other day too. What I did was cut the yellow PK2 wire, stripped a little off of the black reference ground wire, put one lead from my ohm meter on the black ground wire and the other lead on the wire yellow wire going to the ignition switch. Then I put the car in gear and cranked it over. When you do that, the switch will send out what code it has been using. It came out to something like 6.21ohms. I then got some resistors that were about 6.25 and connected one end of the resistors to the cut yellow wire GOING to the BCM and the other end of the resistors to the ground reference wires. It started right up and the theft light went off.
#143 of 159 Re: Passlock problem. [lemmingriot] by crazy7 Sep 11, 2008 (8:31 am)
Replying to: lemmingriot (Jul 16, 2007 9:16 pm) To whom it may concern,I have been having lots of problems with the theft system in a 98 chevy malibu.I replaced the ignition cylinder, key,and starter.The theft system has ben acting up more frequently than before. Even with the new parts that were replaced.The mechanic said we can bypass, if we cut certain electrical wire ,but he said light would stay on and battery would drain after time.Elderaly couple/grandparents needs another persons solution.If anyone else has the same conflict about their theft system,I would like to here from you even if your not a mechanic.Malibu is giving me money problems,and making my life hell.I wont buy another gm,unless I get this solved.Theft system has been going from once a month to now once a day.I cant be stranded do to health problems.Didn't know a malibu,with 90,000 mileson it would be so junk.Winter is approaching in a few months, and dont know if the car is gonna strand me in the cold with my grandkids or what?I cant afford a new car,i am retired.I appreciate any comments available.
#144 of 159 '04 malibu classic ignition problem by fischerj00 Sep 12, 2008 (2:48 pm)
#145 of 159 '04 malibu classic ignition problem by fischerj00 Sep 12, 2008 (2:48 pm)
i have a 2004 malibu classic that won't start. will turn over and over but not starting, also somthing strange when this occurs, when you move the blinker left or right the flasher buzzes and the lights do not flash. it does this when driving down the road or when it is just sitting, most of the time i seem to be able to move the turn signal switch around till it acs normal then it will start, now i can't get it to work, any ideas.
#146 of 159 Re: Severe Grinding Noise [dstidham] by harshads Oct 27, 2008 (1:54 pm)
Replying to: dstidham (Jan 25, 2008 1:25 pm) I have same year car with 118K miles and experienced same grinding problem twice so far! Found any solution yet? Thanks
#147 of 159 Start up and power steering problem by tie_pilot9 Oct 29, 2008 (8:40 am)
I have 2005 maxx it has a run on problem when I start the car, it of course is intermitant when it happens it is like the starter wants to keep trying to start,when it first started it would start after it ran on,know it wont and you have to do it again,then there is a smell of gas(like a old flooded carb) when it starts....the other problem is the power steering,at times it feels like old non power steering,Today it happened when I was driving about 40 mph and I went to turn and it was very hard to turn for about 2-3 min's then it was ok again,up till today it just got hard when I first took off after it was parked and had to turn..I know it is electric pwr steering..would it save a code in the computer,that the dealer could see?
#148 of 159 Re: starting problem [mr_bots] by ba32347 Nov 23, 2008 (6:18 pm)
Replying to: mr_bots (Feb 27, 2006 11:06 pm) ignation problems too   have you found out what is wrong with your malibu's ignation problem...I nned help too

Messages Page 15 of 16 1 ... 10 11 12 13 14 15 16 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Chevrolet Malibu Chevrolet Malibu Start Up/Ignition