Sign In Join 



Yukon "Reduced Engine Power message"

74 messages,  Last post on Oct 12, 2009 at 9:54 PM

You are in the GMC Yukon Forum. Your Hosts are steve_ & tidester

What is this discussion about? GMC Yukon Denali, GMC Yukon XL, Car Safety, Electrical, Engine, SUV


Messages Page 6 of 8
1
2
3
4
5
6
7
8
Prev
Next
Last
Go To Msg #
Search This Discussion

#48 of 74
hi by flex4
May 15, 2008 (1:52 am)
Reply
i have yukon XL 2001 model some time when i drive a car showing message REDUCED ENGINE POWER so you can help me on this
#49 of 74
Re: hi [flex4] by rsht
May 15, 2008 (3:41 am)
Reply

Replying to: flex4 (May 15, 2008 1:52 am)

Have you had the chance to read Message #22 from "bunchz71" on this topic of discussion? He/she posted a link to a picture on where the bad connection was that caused the "Reduced Engine Power" message. Your Yukon is a couple of years older, so the position of the wires/connector may be in a different location.. Hope you locate the trouble maker easily with the information from this forum.
#50 of 74
Pontiac G6 ENG Reduced power by ea4president
May 17, 2008 (9:05 am)
Reply
This morning I went shopping, came home everything was fiine, I tried to go back out a couple hours later, and I got a "ENG REDUCED POWER" message. I tried to turn it off and restart the car maybe that would fix it... nope. The car still ran so I tried to go around the corner, the first time i stopped at a stop sign I had to restart the car. Then the message didn't appear anymore. I continued to a gas station, got the same message when i got back in the car, and called for service. If anyone has any clue how this happens or how to fix it please let me know.
#51 of 74
reduced engine power/traction control lights by drew36
Aug 07, 2008 (12:40 pm)
Reply
I've had a 2005 Express 3500 for awhile now and about 1 year ago I popped a deer on the way to work. This took out the left front quarter along with all the electronics in that area, this was the first I saw of theses lights but a module mounted on that side was busted. Got the van fixed and no problem for 15-20,000 miles. The above mentioned lights came on and all the symptoms as stated from everyone are exactly the same . Shut the engine off and restart works for now. This has happened twice since the wreck on smooth roads with no rain or harsh conditions. One dealer charged to "reprogram" the computer and then told me they would start by replacing the in tank fuel filter, 500+ bucks.I think I will start by checking the engine grounds and the mounting of the fuse box which is oddly enough on the left side under the hood where the deer left his mark. It sounds like these people have a good lead on this problem and several solutions . If you have this same trouble please go to the first post and read all entries ,you'll most likely find your answer.
#53 of 74
Re: REDUCED ENGINE POWER - PROBLEM SOLVED [bunchz71] by chucka4
Aug 24, 2008 (11:27 am)
Reply

Replying to: bunchz71 (Aug 07, 2007 9:10 pm)

2001 Yukon V8 reduced engine power error
 
SPOT ON WITH THE HARNESS!!!!!!! My wife called today with the "reduced engine power" alarm. She restarted it and got it home. I found this website and this post. Took note and went to the connector. moved it around an got the same error. went and looked......YELLOW WIRE WAS BROKE!!!. Now, it looks to be about a 8 strand wire which was bent at the connection. I think that they should have used wire with more strand and made it longer to reduce the "KINK". I soldered a long piece in with more strands. Problem fixed.
  
THANK YOU GUYS!!!!!!!!!!!!!!!!!!!!!!
#54 of 74
2003 GMC SIERRA 2500HD by 096torrer
Nov 09, 2008 (8:07 pm)
Reply
I have an issue with my truck, the check engine came on along with the reduced engine power warning light? Any ideas what to look for?
#55 of 74
Re: REDUCED ENGINE POWER - PROBLEM SOLVED [bunchz71] by 096torrer
Nov 17, 2008 (4:54 pm)
Reply

Replying to: bunchz71 (Aug 07, 2007 9:10 pm)

Does anyone have a photo of what a throttle actuator control (TAC) module is on a 2003 GMC SIERRA 2500HD
#56 of 74
2003 denali XL "Traction Active" by eddy17
Nov 20, 2008 (5:47 pm)
Reply
Help from a start "traction active" displays on dash and you can hear down by the gas pedle inside slipping grinding noise ? and no power not a good thing when your in an intersection ,if I let off the gas and hit it again it takes off , or I have pushed the button on the dash "stability system disabled " and leave it off . is this anything to do with the brown with white stripe plug in under the hood .thanls
#57 of 74
REDUCED ENGINE POWER by edlynaquino
Nov 20, 2008 (8:19 pm)
Reply
I also encountered this REDUCED ENGINE POWER on my 03 YUKON XL. I pulled over. Turned the engine off.Waited a few minutes, then turned it on again and turned it off twice. On the third try, the idling went back to smooth and no more REDUCED ENGINE POWER message.This only started when my battery was dying. After replacing the battery with the engine running, the AC don't seem to blow cold air anymore. I dont even hear the AC compressor kick in. You might be wondering why I had the engine running while replacing the battery because I thought I would need a code to unlock my stereo lock.Please help

Messages Page 6 of 8
1
2
3
4
5
6
7
8
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement