Ask the Car People.SM


Toyota Camry Lighting

131 messages,  Last post on Mar 05, 2013 at 1:49 PM

You are in the Toyota Camry Forum.

What is this discussion about? Toyota Camry, Electrical, Lights, Sedan

Messages Page 12 of 13

#111 of 131 00 Camry fog lights by camry0088

Oct 22, 2008 (5:29 am)

I would like to get the factory style fog lights, but I can't seem to find them, on top of the fact fog lights for 00, 01 were rare as anything. i believe I would have to cut a part of the front bumper out to fit both round fog lights, at least it looks that way when I see factory fog lights on a picture of a camry. Any websites???

#112 of 131 No High Beams by ferdy3

Oct 27, 2008 (6:37 am)

Greetings,
 
I own a 1995 Camry, 4 cylinder, with 156K on it. This morning, my High Beams are disfunctional, and in part, because the lever will no longer move forward to engage them, but does pull back - though now the wipers come on.
 
I did use mt wipers and high beams successfully on Saturday, but for some reason, this morning when I proceeded to work, I was unable to push outward the actual lever to turn them on. Typically, when the lever is pulled toward you, the high beams are engaged until the lever is released. This of course is the same lever which engages the wipers - when I pull the lever down through a series of notches, the wipers work from low to high - and still does. But now, when I pull the lever towards me, the wipers come on!
 
Is this a fuse/relay issue? It''s never happened before.
 
Ferdy

#113 of 131 Re: No High Beams [ferdy3] by kiawah

Oct 27, 2008 (6:57 am)

Replying to: ferdy3 (Oct 27, 2008 6:37 am)
Sounds like your switch lever is bad

#114 of 131 Re: No High Beams [kiawah] by rearwheeldrive

Oct 27, 2008 (10:07 am)

Replying to: kiawah (Oct 27, 2008 6:57 am)
I second that, switch lever.
 
I'd go to Autozone and rent the free steering wheel puller, remove the steering wheel and then the assembly you are having problems with. Sometimes it can be disassembled and maybe fixed. Or you can buy a new assembly, $$$300.00

#115 of 131 Re: No High Beams [rearwheeldrive] by kiawah

Oct 27, 2008 (10:08 am)

Replying to: rearwheeldrive (Oct 27, 2008 10:07 am)
There's airbag's on that year, right?

#116 of 131 Re: No High Beams [kiawah] by rearwheeldrive

Oct 27, 2008 (3:13 pm)

Replying to: kiawah (Oct 27, 2008 10:08 am)
Not sure about airbag, but that requries more steps to avoid deployment.

#117 of 131 Re: No High Beams [kiawah] by 210delray

Nov 01, 2008 (6:23 pm)

Replying to: kiawah (Oct 27, 2008 10:08 am)
Yes, the 1995 Camry has driver and passenger frontal airbags.
 
Do you really need to pull the steering wheel? I changed out the wiper/headlight switch on my 1990 Mercury Sable (which had a driver airbag) without having to remove the wheel.

#118 of 131 Headlights out by Rob_8

Dec 16, 2008 (10:31 am)

I have a 99 Camry. Both low beams went out but the High beams still work. I checked the fuses and the bulbs(both filiments). When you turn the lights on it sounds like the switch relay is working but no low beams. Any ideas.

#119 of 131 Camry Fog Lamp Replacement by sslotnick

Aug 01, 2009 (11:04 am)

any advise with installing replacement fog lamp on Camry SE 2005. Drove thru snow bank and broke clips.

#120 of 131 Re: Camry Fog Lamp Replacement [sslotnick] by kiawah

Aug 01, 2009 (11:34 am)

Replying to: sslotnick (Aug 01, 2009 11:04 am)
Can't you get replacement parts at the toyota dealership? or is it the lamp itself that is broken. If it is the lamp, you may be able to buy a replacement on the internet.
 
I've bought a replacement tail light on my 2007 couple years ago.

Messages Page 12 of 13

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement