You are here:
Forums
Sedans
Toyota Camry
Toyota Camry Lighting

120 messages, Last post on Aug 01, 2009 at 10:34 AM
You are in the Toyota Camry Forum. Your Hosts are pat & karens
| I would like to get the factory style fog lights, but I can't seem to find them, on top of the fact fog lights for 00, 01 were rare as anything. i believe I would have to cut a part of the front bumper out to fit both round fog lights, at least it looks that way when I see factory fog lights on a picture of a camry. Any websites??? | |
|
Greetings, I own a 1995 Camry, 4 cylinder, with 156K on it. This morning, my High Beams are disfunctional, and in part, because the lever will no longer move forward to engage them, but does pull back - though now the wipers come on. I did use mt wipers and high beams successfully on Saturday, but for some reason, this morning when I proceeded to work, I was unable to push outward the actual lever to turn them on. Typically, when the lever is pulled toward you, the high beams are engaged until the lever is released. This of course is the same lever which engages the wipers - when I pull the lever down through a series of notches, the wipers work from low to high - and still does. But now, when I pull the lever towards me, the wipers come on! Is this a fuse/relay issue? It''s never happened before. Ferdy
|
|
|
Replying to: ferdy3 (Oct 27, 2008 5:37 am) |
|
|
|
|
Replying to: kiawah (Oct 27, 2008 5:57 am) I'd go to Autozone and rent the free steering wheel puller, remove the steering wheel and then the assembly you are having problems with. Sometimes it can be disassembled and maybe fixed. Or you can buy a new assembly, $$$300.00
|
|
|
Replying to: rearwheeldrive (Oct 27, 2008 9:07 am)
|
|
|
|
|
Replying to: kiawah (Oct 27, 2008 9:08 am) |
|
|
Replying to: kiawah (Oct 27, 2008 9:08 am) Do you really need to pull the steering wheel? I changed out the wiper/headlight switch on my 1990 Mercury Sable (which had a driver airbag) without having to remove the wheel. |
|
| I have a 99 Camry. Both low beams went out but the High beams still work. I checked the fuses and the bulbs(both filiments). When you turn the lights on it sounds like the switch relay is working but no low beams. Any ideas. | |
any advise with installing replacement fog lamp on Camry SE 2005. Drove thru snow bank and broke clips.
|
|
|
Replying to: sslotnick (Aug 01, 2009 10:04 am) I've bought a replacement tail light on my 2007 couple years ago. |
|
You are here:
Forums
Sedans
Toyota Camry
Toyota Camry Lighting
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Toyota Camry



Browse by Board
Browse by Topic
Today's Chats