Last post on Jul 27, 2009 at 3:41 PM
You are in the Toyota Camry
What is this discussion about?
Toyota Camry, Interior, Sedan
#78 of 85 2008 Toyota Camry LE with XLE wood trim
Oct 24, 2007 (3:42 pm)
I'm going to be purchasing a Camry LE, but would like to buy wood trim parts for the LE. I basically want the exact wood trim on the XLE. Know any good accessory stores for good prices.
#79 of 85 Re: dash board a/c lights 2002 Camry [gprestia]
Nov 01, 2008 (5:41 pm)
i have the same problem with my 02 camry, just wandering if you already fix it let me know how. and if anybody know how to do this please reply ASAP. thanks a lot.
#80 of 85 1998 Camry XlE Door handle trim interior Paint
Jul 18, 2009 (2:24 pm)
I have a 1998 camry XLE. Im replacing the driver side interior door handle trim. I have the new part but i need to paint to match exactly with the original color. Its beige in color. Thats all I know. Ive been looking everywhere online but i just cant find it. Those anyone where can i find it? Thanx
#81 of 85 Re: 1998 Camry XlE Door handle trim interior Paint [almonte8708]
Jul 18, 2009 (2:52 pm)
I'd check a dealership for paint
#82 of 85 2010 Camry Interior
Jul 22, 2009 (1:20 pm)
Hi, I recently test drove a fully loaded 2010 XLE V6 with nav and I have to say that the interior in this camry was pretty nice looking. I know the earlier models in 2007 and 2008 had some quality issues and some didn't like it but I think Toyota did a nice job on the refresh for 2010 in correcting the quality issues, panel gaps, and darkening the wood grain in the cabin that plagued earlier models that last few years. I feel the materials in the 2010 XLE made for a quite luxury feel to the cabin and bringing it back closer to Toyota quality and ergonomics!
#83 of 85 Interior door latch broke
Jul 26, 2009 (6:29 am)
The passenger side interior door handle plastic lever snapped on my 2002 Camry.
I can buy a replecement for $20 or so online. Has there been any recall on these ? It would seem dangerous to be unable to open the door from inside in an accident.
How difficult is it to remove the old plastic interior latch unit ? Do you just pry the unit out to replace, or have you got to disassemble surrounding upholstery panels ?
#84 of 85 Re: Interior door latch broke [jmgar]
by MrShift@Edmunds HOST
Jul 26, 2009 (8:53 am)
Usually you can buy these replacements at the dealer, yes. Most of them come out by prying off the plastic shield behind the handle (the shield where your fingernails touch the plastic) and there is usually one or two phillips screws there.
I haven't worked on your particular car, so in some cases you'll have to pop the door panel off to detach the handle from the activating lever. You'll have to get in there and poke around. Also when you see the new part that should tip you off.
Plastic breaks on 7 year old cars. That's normal wear and tear on a part that takes a lot of abuse.
#85 of 85 Re: Interior door latch broke [Mr_Shiftright]
Jul 27, 2009 (3:41 pm)
Thanks. I saw some on line. Not too expensive ($20 delivered) . I'll check the dealers price as well. When I get it, I'll see if I want to pop it on myself. Shouldn't be too much trouble.