You are here: Forums Sedans Toyota Camry Toyota Camry Fuse and Electrical Questions

Toyota Camry Fuse and Electrical Questions

872 messages,  Last post on Dec 05, 2009 at 1:27 PM

You are in the Toyota Camry Forum. Your Hosts are pat & karens

What is this discussion about? Toyota Camry, Electrical, Sedan

Messages Page 2 of 88 1 2 3 4 5 6 7 ... 88 Prev Next Last

Go To Msg # Search This Discussion

#8 of 872 Re: low fuel indicator light malfunction [dirk3] by scottt Oct 12, 2004 (10:09 am)
Replying to: dirk3 (Sep 08, 2004 10:06 am) Odd, but I have a 2004 Highlander and its low fuel indicator comes on at about 17-gallons-gone. Do not know if that helps, but the Highlander ha the Camry chasis, engine and drive train and same fuel capacity.
#9 of 872 Permanent fix for turn signal malfunction by bobgermany Nov 06, 2004 (10:43 pm)
Hello everyone. Has anyone ever permanently fixed the malfunctioning turn signal problem by replacing the whole bulb socket wiring assembly? Is this possible. I want to completely fix this problem. I have done all the other solutions but of course they only work for a little while. Thanks Bob   99 Camry V6
#10 of 872 window/door lock fuse? by newfoldenkid Mar 13, 2006 (9:02 pm)
Hi all. I have a 1990 Camry, love it, 314,000 miles and running strong. Recently my electric windows and door locks quit working, I assume it is a blown fuse, but after pulling every fuse (I think) none of them were blown. And on the fuse covers I see nothing about power windows or door locks. Anyone tell me what I am missing here? Thanks in advance for any help you can give me. Replies to this message: maxmax31 (May 13, 2006 6:54 pm) truckers (Apr 18, 2007 12:54 pm)
#12 of 872 Re: window/door lock fuse? [newfoldenkid] by maxmax31 May 13, 2006 (6:54 pm)
Replying to: newfoldenkid (Mar 13, 2006 9:02 pm) If you find a solution of the problem with power locks/windows, could you please post it here? I have the same problem with my Toyota Camry 95. Thank you.
#13 of 872 Interior Dome Light by yazyazoo Mar 25, 2006 (10:44 pm)
I have a 99 Camry. My dome light has gone out and I replaced the bulb. However this doesn't seem to have corrected the problem. The fuse looks fine and can't see anything else that could be wrong. Any suggestions or what could be wrong. It isn't nice coming into a dark car at night. Replies to this message: bildow (Mar 26, 2006 11:09 am) yazyazoo (Mar 26, 2006 12:56 pm) user777 (Mar 26, 2006 3:38 pm) bildow (Mar 27, 2006 9:42 pm) wwest (Mar 27, 2006 10:17 pm) and 1 more... jloach (Apr 18, 2006 9:39 am) jloach (Apr 20, 2006 3:46 am)
#14 of 872 Re: Interior Dome Light [yazyazoo] by bildow Mar 26, 2006 (11:09 am)
Replying to: yazyazoo (Mar 25, 2006 10:44 pm) Check your door switch and make sure it's working it turns on and off the dome light. Replies to this message: yazyazoo (Mar 26, 2006 12:56 pm)
#15 of 872 Re: Interior Dome Light [bildow] by yazyazoo Mar 26, 2006 (12:56 pm)
Replying to: bildow (Mar 26, 2006 11:09 am) The light never comes on. So pushing the switch makes no difference. If I open one or all doors the light doesnt work.
#16 of 872 Re: Interior Dome Light [yazyazoo] by user777 Mar 26, 2006 (3:38 pm)
Replying to: yazyazoo (Mar 25, 2006 10:44 pm) ever replace a burnt-out lightbulb in your house with a brand new bulb which also turns out to be bad? it happens.   if you had a volt/ohm/amp multi-meter (Radio Shack, Home Depot, or Lowes), you could see if you are getting 12V at the fixture, and/or if the bulb's filament is good.   can you turn the switch on the interior dome light from OFF or DOOR to ON? Replies to this message: bildow (Mar 27, 2006 9:42 pm) wwest (Mar 27, 2006 10:17 pm) yazyazoo (Mar 27, 2006 10:52 pm)
#17 of 872 Re: Interior Dome Light [user777] by bildow Mar 27, 2006 (9:42 pm)
Replying to: user777 (Mar 26, 2006 3:38 pm) I agree with the idea of getting a volt meter and checking the bulb socket put the positive (red) probe to the center of the bulb socket and the (black) probe to the outside or ground if you are not 12vdc reading from the socket then if you are able to check the fuse from one side to get a 12 vdc reading if not your best bet is an shop that works only on auto electrical they can usually find the problem. Good Luck Replies to this message: wwest (Mar 27, 2006 10:17 pm) yazyazoo (Mar 27, 2006 10:52 pm)

Messages Page 2 of 88 1 2 3 4 5 6 7 ... 88 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Toyota Camry Toyota Camry Fuse and Electrical Questions