You are here:
Forums
Sedans
Toyota Camry
Toyota Camry Fuse and Electrical Questions

874 messages, Last post on Dec 07, 2009 at 9:06 AM
You are in the Toyota Camry Forum. Your Hosts are pat & karens
|
|
|---|---|
|
Replying to: kiawah (Jul 08, 2009 10:31 pm) |
|
|
|
can anyone help? I don't have any tail lights, the bulbs and fuses are ok and they do turn on when i hit the brake pedal its just that at night i don't have any tail lights except side lights.
|
|
|
Replying to: berthag2730 (Jul 12, 2009 12:45 pm) |
|
I am looking for advice on how to fix the power to the power locks and windows on my 96 Camry. I have checked all the small fuses and they are good. Any suggestions would be appreciated.
|
|
|
Replying to: tim131 (Jul 13, 2009 2:40 pm)
|
|
|
Replying to: kiawah (Jul 13, 2009 2:51 pm)
|
|
|
Replying to: tim131 (Jul 13, 2009 4:02 pm) Pull the drivers door panel switch, check that you have power there.
|
|
|
Replying to: kiawah (Jul 13, 2009 4:17 pm) |
|
|
|
|
Got a 99 toyota camry that is blowing the 10a gauge fuse immediately as soon as the car is put in reverse. If I skip over reverse quickly it wont do it but if I shift into reverse within about 1-2 seconds it blows. I checked the trunk wiring and it is all good. I followed it all back to the fuse panel and unhooked 3 of the 4 connections of the rear harness leaving only the plug that powers the fuel pump connected. It still blew. I am also throwing P0446 Evap Malfunction and P0500 Speed sensor codes but I don't know if that is related. I've read pretty much this whole thread but couldn't find a solution, please help.....Thanks |
|
|
|
Hmmmm, cranked the car, disconnected the Neutral safety switch and it didn't blow the fuse. So I guess the neutral safety switch is bad?
|
|
You are here:
Forums
Sedans
Toyota Camry
Toyota Camry Fuse and Electrical Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Toyota Camry



Browse by Board
Browse by Topic
Today's Chats