Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans Toyota Camry Toyota Camry Fuse and Electrical Questions
874 messages, Last post on Dec 07, 2009 at 9:06 AM
You are in the Toyota Camry Forum. Your Hosts are pat & karens
|
Replying to: sid007 (Mar 17, 2009 9:36 am) Unfortunately, the power source for the headlight and taillight relays are powered all of the time. This is what allows the integration relay to keep your headlights on when you leave the vehicle, and then it turns them off a bit later. So your work around, will keep those two relays continuously energized, and those down stream circuits then continuously energized .....with your headlights ON You'd have to be plugging and unplugging the wire to the headlight primary. A non-authorized and supported modification (which is something I might consider on a 12 year old vehicle depending upon whatever the price of an integration relay..........), would be to consider to wire my own power to those circuits. Radio shack has generic 12 volt relays, with mounting sockets. You could wire up a new relay, which primary was turned ON by the key ON circuit. Then with the secondary points, use that to complete the circuit and turn on the headlight and relay primaries. Those two relays provide their normal power to their circuits. You turn the key off, your new relay turns off, drops the power to the headlight/taillight relay, and everything turns off. Or, a manual approach would be to buy a simple generic auto switch at say Pepboys, mount it under the dash, and use that switch to manually turn on the headlight/taillight relay. I quickly mention both of those as work arounds, but have NOT checked out all of the circuitry involved with the integration relay to worry about what else wouldn't be working correctly, nor have I thought through the ramifications of those two circuits being on all the time the engine is running, or off when you forget to turn the switch on. I think I'd check a junk yard, to see if they have and would sell an integration relay. |
|
|
|
| Bought a 90 wagon 2.0 L and found the power outlet (cigarette lighter) does not deliver power. 15 amp fuse under driver side kick panel is intact. Is there a relay behind the unit? And how can I get to it without pulling the dash off? She's a good red wagon and deserves TLC. | |
|
|
|
Replying to: frankthelast (Mar 22, 2009 4:12 pm) |
|
|
Replying to: frankthelast (Mar 22, 2009 4:12 pm) The 15A Cig fuse, feeds the cig lighter and is one of the power feeds to the clock. There is no relay involved. I would suggest either replacing that fuse, or getting an ohm meter to verify that the fuse really isn't blown inside. You should have zero resistance when measuring the fuse. That cig fuse slot, gets it's power 'upstream' from one of the circuits in the key switch. The key needs to be in the on or accessory position for power to go to the lighter. If your fuse meters okay with an ohmmeter, then switch the meter to voltage and verify that the fuse slot has 13volts on one of the pins. Measure from the fuse slot with the red+ lead, and the black- lead connected to a metal piece of the car frame. |
|
I just bought a used 1999 camry and the door lock buttons on both driver and passenger side do not work. The window lock and window buttons work on all doors just not the door locks. I also did not get a keyless entry remote nor the manual so i'm not sure how to trouble shoot this problem. Is there a second hidden fuse box in the car somewhere that i cant find? I checked my fuses and everything looks good but i cant figure out the door lock problem. We have to lock/unlock all four door by hand and that becomes a pain when you are outside of the car and want to open the backseat doors, you have to reach all the way around and back from the front doors. Any help or advice would be great.
|
|
|
Replying to: aroland77 (Mar 23, 2009 1:17 pm) In the Instrument Panel Junction box (inside the car), by the drivers left knee behind the ash tray area, check: - 25A Door fuse - 10 A Gauge fuse - 10 A Tail fuse - 30 A Power fuse. This 30 A fuse is a much bigger fuse, down in the lower right quadrant, like at about 5 oclock in the fuse box by looking at it. In the engine compartment, on the left fenderwall area, check: - 7.5A Dome fuse
|
|
| I am searching for the wiring diagram for my 09 camry se i4 so i can work on the alarm system and remote starter. Thanks in advance | |
|
Replying to: ryan99 (Sep 01, 2006 3:59 pm) |
|
| The hazards are turning on and off, but the turn signals are not working in my 2000 Camry. I think the issue is with the Relay, but am not able to locate it. I found the Hazard flasher on the left side of the drivers foot under the hood, but cannot see any other flasher near it. Any help on how to locate and replace it (there is no noise at all from it) will be much appreciated! | |
|
Replying to: kiawah (Mar 23, 2009 4:40 pm) Thank you for the info on the different Fuses, It was 25A Door Fuse. Switched it out and the door locks work again. Now i just have to buy a keyless remote so that I dont have to use the keys to unlock the car anymore. At least now i can use my key in the drivers door and unlock my door and the other doors. 
|
|
You are here:
Forums
Sedans Toyota Camry Toyota Camry Fuse and Electrical Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Toyota Camry
Browse by Board
Browse by Topic
Today's Chats
