15 messages,
Last post on Jul 14, 2008 at 12:19 PM
You are in the
Chrysler/Plymouth Voyager, Dodge Caravan Forum.
What is this discussion about?
Chrysler Voyager, Audio, Van
#11 of 15 Caravan 2000 updating audio problem
by tirna51
Jan 09, 2008 (12:55 pm)
I have a 2000 Dodge Caravan with the Infinity Speakers. I bought a CD player and tried to install it yesterday and couldn't get any audio from the new system. I returned the system to BestBuy and they said the system was fine, but it had something to do with the Infinity system in the Caravan.
Can anyone tell me how I can change out the original factory tape player and upgrade to a CD player? I was told there was a wire under the hood that powered the speakers, but Best Buy wouldn't tell me where the wire was or what I needed to do to install my system.
Any ideas?
#12 of 15 2001 Grand Caravan
by pittsbk
Jan 11, 2008 (2:40 pm)
Having same exact problem as Tirna 51....Best Buy no help ...Been at this for Hours Now....I know it has something to do with brown/green amp wire...Please Help!!!
#13 of 15 Re: Caravan 2000 updating audio problem [tirna51]
by bechnutnascar
Jan 31, 2008 (7:47 pm)
hello,just hook up the blue wire from your factory harness to the blue remote wire on the new deck harness.you have a factory amp .
#14 of 15 '93 DC Infinity Audio Question
by fuelfixer
Jul 06, 2008 (1:11 am)
Does ANYONE have a site where I can research just what Infinity Receivers,Cassette,CD units belong to which years? & Which will cross-reference & work? ALSO, Infinity speakers: Model numbers associated w/ which years? OTHER:Just plain information on Infinity before I go baNaNaz
#15 of 15 Infinity 8 Speaker in Caravan
by ktk0117
Jul 14, 2008 (12:19 pm)
My 1998 Grand Caravan has an 8 speaker system. 2 on dash, 2 in front doors, two by rear seat in sides, and 2 small (tweeters?) in the rear left gate.
All the in dash units I see in stores to replace this only have 4 channels. Can anyone shed some light on how to wire this, or send a diagram?
I'm not sure if the extra speakers are tied into one another on those channels or what.
Or do I buy a non-powered unit and use (if supplied) amp already in the van?
Any help will be greatly appreciated.
Thanks