You are here:
Forums
Vans & Minivans
Toyota Sienna
Toyota Sienna Navigation System

205 messages, Last post on Nov 20, 2009 at 11:24 AM
You are in the Toyota Sienna Forum. Your Host is Karens
|
Do all models with Nav also have the backup cam? Do they add trajectory lines? |
|
|
Replying to: navbroken (Aug 30, 2009 4:43 pm) Another thing to look at is the compass symbol in upper left corner. Just under that, there should be a "GPS" icon. If the icon has disappeared, it means it is not getting GPS reception. (No reception is normal in a parking garage or tunnel but it should never disappear out in the open road.) |
|
|
Toyota just released V9.1 today for $199. I bought one 3 years ago for $265. The part numbers for the Siennas are: 86271-GEN23-09 2003-2004 86271-GEN04-09 2005 86271-GEN05-09 2006-2010 86271-GEN06-09 2011
|
|
|
I have a 2009 Sienna Limited AWD. Due to the lock up of the navigation system while in motion, I have burned a hybrid navigation disc with 5.1 loading.kwi & Version 8.1 data. However, I was unable to get to the override screen as mentioned in this forum. Could someone clarify here whether the hybrid disc is good for 2009 Sienna? Thanks! Mal168
|
|
|
|
|
Replying to: mal168 (Sep 22, 2009 7:24 pm)
|
|
|
Replying to: dramexpert (Sep 23, 2009 3:16 am) Thanks for your reply. I also followed Trav2's instruction to create the hybrid disk. However, there is no response in the screen after numerous attempts. The hybrid disk just works as my original V8.1 Navigation disk. I don't know which parts went wrong. Mal168 |
|
After further research & investigation, my problem was eventually resolved by clearing out the memory in the navigation system. As my Sienna is a newer model, it is still utilizing the current loading.kwi due to the memory in the navigation system even I have replaced the hybrid disc with older version of loading.kwi. We have to clear out the memory by removing the power from the navigation system either disconnecting the negative cable of the battery or the Radio fuse from the main fuse box for a while. Once power is reconnect, it will reload the older firmware version of loading.kwi from the hybrid disk. I realize some of us, who have newer Sienna, have encountered the same problem, and I would like to share with you my experience. I can now override the nav system any time for my 2009 Sienna Limited AWD.
|
|
|
Replying to: mal168 (Sep 28, 2009 2:51 pm) |
|
|
Replying to: jmt27 (Jul 26, 2009 6:39 am) |
|
|
Replying to: navguy1 (Sep 01, 2009 2:47 pm) |
|
You are here:
Forums
Vans & Minivans
Toyota Sienna
Toyota Sienna Navigation System
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2011 Toyota Sienna



Browse by Board
Browse by Topic
Today's Chats