Sign In Join 



Toyota Sienna Navigation System

206 messages,  Last post on Dec 07, 2009 at 8:47 PM

You are in the Toyota Sienna Forum. Your Host is Karens

What is this discussion about? Toyota Sienna, Navigation System, Van


Messages Page 18 of 21
1
...
15
16
17
18
19
20
21
Prev
Next
Last
Go To Msg #
Search This Discussion

#171 of 206
Creating that Hybrid Disk by superkel
Jul 30, 2009 (4:58 pm)
Reply
I am so glad to hear that there is something that can be done to fix this frustrating issue with the Navi. I too just purchased my 2010 Sienna 2 weeks ago and not happy that my passenger cannot put in our destination while I am driving. I read the post on creating that hybrid disk. I went out and purchased the dual layer disk trying make that one . The problem is ... I am not savy with it with all the codes. Can someone walk me through the process of creating the hybrid disk? I would really appreciate it.
#172 of 206
Re: Sienna GPS problem [swillo] by navbroken
Aug 30, 2009 (4:43 pm)
Reply

Replying to: swillo (Mar 05, 2007 7:10 am)

I know this is a few years old but I have the same issue today. Where nav system works but the unit shows me being somewhere completely different from where I currently am at. has anyone had this issue fixed yet? If so what was the cure? The dealer says i need to buy the latest Map and it will fix it....But honestly I can tell just from the conversation they aren't really confident about that....it seems so one told them and they are 100% sure it will work or they are just outright guessing.
 
I just am looking for verification on the solution and I am open to any other remedies.
 
thanks
#173 of 206
Q. about backup cam by ateixeira
Aug 31, 2009 (12:01 pm)
Reply
Do all models with Nav also have the backup cam?
 
Do they add trajectory lines?
#174 of 206
Re: Sienna GPS problem [navbroken] by mdchachi
Aug 31, 2009 (7:07 pm)
Reply

Replying to: navbroken (Aug 30, 2009 4:43 pm)

This could mean that it's not getting a GPS signal. Did you have any work done, add a satellite radio tuner, etc before you noticed this? If so, it could simply be that the GPS antenna is unplugged.
 
Another thing to look at is the compass symbol in upper left corner. Just under that, there should be a "GPS" icon. If the icon has disappeared, it means it is not getting GPS reception. (No reception is normal in a parking garage or tunnel but it should never disappear out in the open road.)
#175 of 206
New Toyota DVD map disc by navguy1
Sep 01, 2009 (2:47 pm)
Reply
Toyota just released V9.1 today for $199. I bought one 3 years ago for $265.
 
The part numbers for the Siennas are:
 
86271-GEN23-09 2003-2004
86271-GEN04-09 2005
86271-GEN05-09 2006-2010
86271-GEN06-09 2011
#176 of 206
Hybrid navigation disc for 2009 Sienna by mal168
Sep 22, 2009 (7:24 pm)
Reply
I have a 2009 Sienna Limited AWD. Due to the lock up of the navigation system while in motion, I have burned a hybrid navigation disc with 5.1 loading.kwi & Version 8.1 data. However, I was unable to get to the override screen as mentioned in this forum. Could someone clarify here whether the hybrid disc is good for 2009 Sienna?
 
Thanks!
 
Mal168
#177 of 206
Re: Hybrid navigation disc for 2009 Sienna [mal168] by dramexpert
Sep 23, 2009 (3:16 am)
Reply

Replying to: mal168 (Sep 22, 2009 7:24 pm)

I followed the instructions in Message #160, and the hybrid disk I made does work fine in my 2009 Sienna. You have to press the "I Agree" button and the motion lock-out has to be disabled every time you start the van, but then all functions are available.
#178 of 206
Re: Hybrid navigation disc for 2009 Sienna [dramexpert] by mal168
Sep 23, 2009 (7:05 am)
Reply

Replying to: dramexpert (Sep 23, 2009 3:16 am)

Hi dramexpert,
 
Thanks for your reply. I also followed Trav2's instruction to create the hybrid disk. However, there is no response in the screen after numerous attempts. The hybrid disk just works as my original V8.1 Navigation disk. I don't know which parts went wrong.
 
Mal168
#179 of 206
Hybrid navigation disc for 2009 Sienna by mal168
Sep 28, 2009 (2:51 pm)
Reply
After further research & investigation, my problem was eventually resolved by clearing out the memory in the navigation system. As my Sienna is a newer model, it is still utilizing the current loading.kwi due to the memory in the navigation system even I have replaced the hybrid disc with older version of loading.kwi. We have to clear out the memory by removing the power from the navigation system either disconnecting the negative cable of the battery or the Radio fuse from the main fuse box for a while. Once power is reconnect, it will reload the older firmware version of loading.kwi from the hybrid disk. I realize some of us, who have newer Sienna, have encountered the same problem, and I would like to share with you my experience. I can now override the nav system any time for my 2009 Sienna Limited AWD.
#180 of 206
Re: Hybrid navigation disc for 2009 Sienna [mal168] by ateixeira
Sep 29, 2009 (10:59 am)
Reply

Replying to: mal168 (Sep 28, 2009 2:51 pm)

Thanks for documenting this fix.

Messages Page 18 of 21
1
...
15
16
17
18
19
20
21
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement