- #41 of 219
-
Re: pulling to the right [jlm]
by itshemi
-
Jul 09, 2004 (6:40 am)
-
|
|
Replying to: jlm (Jun 10, 2004 4:55 am)
The dealer I've spoken with Chrysler of Alexandria, VA stated that that the cars that are candidate for the pull were build March and before. Dealer stated my card 17April04 was not one of them.
For all current 300c owners my car is in for the hood latch broken, embarrassing situation showing folks 4 July car and could not close the hood, 200 miles from dealer and I had to us budgie cord to secure hood, also notified the dealer that I just received to recall letters D28 and D30, which they advised me they were going to correct.
http://photos.yahoo.com/jlsy2001
|
- #42 of 219
-
Re: pulling to the right [jlm] [itshemi #80]
by jeep
-
Jul 09, 2004 (3:02 pm)
-
|
|
Replying to: itshemi (Jul 09, 2004 6:40 am)
What were the rcalls for? Please elaborate.
|
- #43 of 219
-
Re: pulling to the right [jeep #81]
by barry626
-
Jul 09, 2004 (8:10 pm)
-
|
|
Replying to: jeep (Jul 09, 2004 3:02 pm)
D-30 is...
Anyone else receive notice? I did today.
Recall notice: Front Shoulder belt adjuster turning loop bolts.
May not be properly tightened?
May increase the risk of injury to front occupants.
Ordered my 300c on 4/6, built 4/21, took delivery 4/29.
|
- #44 of 219
-
Re: pulling to the right [texas bob]
by donnak1
-
Feb 23, 2005 (8:07 pm)
-
|
|
Replying to: texas bob (Jun 09, 2004 6:03 am)
Guess what texasbob, I bought a 2005 Dodge Magnum last Sept. and it pulls to the right and even after the cradle adj. it still does it. It's in the shop right now for the 3rd time for this. I have less than 4K miles on it and am very tired of this. The district zone manager was out on the 2nd time fix and told me to keep both of my hands on the wheel and it will not drift. BS Monday they told me the drift to the right is a safety feature put in all cars by all manufacturers to keep us from having head on collisions. I'm calling the Ill. Atty Generals Consumer Fraud division tomorrow. I did sign the I won't sue my dealer paper when I bought this car.
Donna
|
- #46 of 219
-
Re: pulling to the right [texas bob]
by decker3
-
May 03, 2005 (5:27 am)
-
|
|
Replying to: texas bob (Jun 09, 2004 6:03 am)
Hi Texas Bob, I have been try to get a copy of the TSB 02-003-04 Chrysler has removed it from their files if you have a copy of this notice still I would really like to get my hands on it as I am going to arbitration first week of June. Please go to my profile and get my e-mail address. Thanks
|
- #47 of 219
-
300C Right Pull
by mikec1
-
Jun 14, 2004 (4:23 pm)
-
|
|
My 300C was manufactured on May 5th and has the correct cam alignment bolts, but still pulls right. There are however new alignment specs. I will be taking it in to have it adjusted and post results. It was previously aligned under the pre-cam bolt change specs.
|
- #48 of 219
-
Re: 300C Right Pull [mikec1 #35]
by jeep
-
Jun 15, 2004 (6:13 am)
-
|
|
Replying to: mikec1 (Jun 14, 2004 4:23 pm)
Funny, mine was built on May 4th and I don't have any pulling problems. I wonder why some cars do and some don't. Do you have any ideas?
|
- #49 of 219
-
Re: 300C Right Pull [jeep #37]
by jayrider
-
Jun 15, 2004 (11:16 am)
-
|
|
Replying to: jeep (Jun 15, 2004 6:13 am)
The variables in assembling a new car are numerous. Parts, workers, etc, are not 100% consistent. This is especially true for new models. The odds are still in your favor that most will experience few problems but when you're slapping together thousands of vehicles, stuff happens. Those who wanted the first issues of the 300 will serve those who waited a year or two by providing the trouble shooting necessary to minimize the headache potential in these cars.
|
- #50 of 219
-
Re: 300C Right Pull [mikec1]
by weidnerlaw
-
Aug 03, 2004 (9:23 am)
-
|
|
Replying to: mikec1 (Jun 14, 2004 4:23 pm)
Did the pulling resolve?
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans 
