Sign In Join 

You are here: [F] Forums / Sedans / Chrysler 300/300C/300C SRT-8 / Chrysler 300: Alignment Issues



Chrysler 300: Alignment Issues

219 messages,  Last post on Jul 19, 2009 at 2:25 PM

You are in the Chrysler 300/300C/300C SRT-8 Forum. Your Hosts are pat & karens

What is this discussion about? Chrysler 300, Chrysler 300C SRT-8, Steering, Sedan


Messages Page 5 of 23
1
2
3
4
5
6
7
8
...
23
Prev
Next
Last
Go To Msg #
Search This Discussion

#34 of 219
Re: Chrysler 300 Owners: Problems & Solutions [docmark1] by service
Mar 29, 2006 (5:59 pm)
Reply

Replying to: docmark1 (May 30, 2004 8:41 am)

service should have the tsb for the bushings
are you riding on continental tires ??
if so don't waste your time
have them replaced.
its not an align problem its a tire problem
prorated in canada.
let me know how you make out
              manager
#35 of 219
pulling to the right by jlm
Jun 08, 2004 (5:01 pm)
Reply
same issue here. have about 1500 miles on my 300, dealership had the car for 8 days, claims to of tried everything. the TSB out there was useless, it did no good. they even had a regional rep come in the area (charlotte, nc) and still no fix. i took the car today because i honestly feel like the dealership exhausted all their options, but i'll give it a few days. ride home was very annoying veered right the entire time, just like when i brought it in, service manager's response was these cars are very sensitive and any flaw in the road will cause a veer. i'll give it a few more days before i take it in again. a brand new 30+k auto should not have an issue like this.
#36 of 219
Re: pulling to the right [jlm #24] by texas bob
Jun 09, 2004 (6:03 am)
Reply

Replying to: jlm (Jun 08, 2004 5:01 pm)

I have a copy of the TSB; all 300's built before April 25, 2004 have the pull problem. Don't let your dealer blame it on something else. Time allowance in the TSB for completion of the fix is 1.7 hours, they really don't need a full day or longer. Again, it's TSB 02-003-04 dated May 25, 2004
#37 of 219
Re: pulling to the right [texas bob #26] by arnoldw
Jun 09, 2004 (4:15 pm)
Reply

Replying to: texas bob (Jun 09, 2004 6:03 am)

NOT all 300s built before apr 25 have pull. TSB states drive the car on a FLAT road. IF the car tracks straight, the vehicle operator is experiencing crown sensitivity. My 300c was built apr 17...steers great. Test drove 2 other 300s before purchase and they were fine also.
#38 of 219
Re: pulling to the right [arnoldw #29] by jlm
Jun 10, 2004 (4:55 am)
Reply

Replying to: arnoldw (Jun 09, 2004 4:15 pm)

thanks for the info, my questions is then why does the car not pull to the left at times, not every road is crowned on the right side. i have driven on the flatest streets, and the pull is always to the right, i have even gone on the oppposite side of the road , where the the crown of the road is on the left side , and it still pulls right.
#39 of 219
Re: pulling to the right [jlm #30] by arnoldw
Jun 10, 2004 (2:59 pm)
Reply

Replying to: jlm (Jun 10, 2004 4:55 am)

Sure glad i've got one of the good ones. You'd think it would be a simple alignment to correct the problem. Hope they find a fix for your's and others soon so you can enjoy it like me! I wonder if a lot of these cars are like this?
#40 of 219
Re: pulling to the right [texas bob #26] by 300hemifl
Jun 14, 2004 (5:32 pm)
Reply

Replying to: texas bob (Jun 09, 2004 6:03 am)

I bought my 300c on April 27th. So far, I've had no problems with pulling. Car has been pretty good (knock on wood). A/C could blow colder air from the get-go, and especially from the back vents. Also, my black exterior is a pain to keep clean (of course), but my light carpets are even more of a bit*h. I may order dark mats. Other than that, very happy.
#41 of 219
Re: pulling to the right [jlm] by itshemi
Jul 09, 2004 (6:40 am)
Reply

Replying to: jlm (Jun 10, 2004 4:55 am)

The dealer I've spoken with Chrysler of Alexandria, VA stated that that the cars that are candidate for the pull were build March and before. Dealer stated my card 17April04 was not one of them.
 
For all current 300c owners my car is in for the hood latch broken, embarrassing situation showing folks 4 July car and could not close the hood, 200 miles from dealer and I had to us budgie cord to secure hood, also notified the dealer that I just received to recall letters D28 and D30, which they advised me they were going to correct.
 
http://photos.yahoo.com/jlsy2001
#42 of 219
Re: pulling to the right [jlm] [itshemi #80] by jeep
Jul 09, 2004 (3:02 pm)
Reply

Replying to: itshemi (Jul 09, 2004 6:40 am)

What were the rcalls for? Please elaborate.
#43 of 219
Re: pulling to the right [jeep #81] by barry626
Jul 09, 2004 (8:10 pm)
Reply

Replying to: jeep (Jul 09, 2004 3:02 pm)

D-30 is...
 
Anyone else receive notice? I did today.
 
Recall notice: Front Shoulder belt adjuster turning loop bolts.
May not be properly tightened?
May increase the risk of injury to front occupants.
 
Ordered my 300c on 4/6, built 4/21, took delivery 4/29.

Messages Page 5 of 23
1
2
3
4
5
6
7
8
...
23
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

You are here: [F] Forums / Sedans / Chrysler 300/300C/300C SRT-8 / Chrysler 300: Alignment Issues

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Learn More

2011 Chrysler 300

Computer generated image of the 2011 Chrysler 300 Sedan Shown

More Pictures

DoMore

Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement