You are here: Forums Sedans Chrysler 300/300C/300C SRT-8 Chrysler 300: Alignment Issues

Chrysler 300: Alignment Issues

219 messages,  Last post on Jul 19, 2009 at 2:25 PM

You are in the Chrysler 300/300C/300C SRT-8 Forum. Your Hosts are pat & karens

What is this discussion about? Chrysler 300, Chrysler 300C SRT-8, Steering, Sedan

Messages Page 4 of 22 1 2 3 4 5 6 7 ... 22 Prev Next Last

Go To Msg # Search This Discussion

#30 of 219 Re: Chrysler 300 Owners: Problems & Solutions [jhterceira] by motcrue68 Feb 09, 2005 (4:38 pm)
Replying to: jhterceira (Feb 08, 2005 3:42 pm) I was also worried about all these problems when I ordered my 300C. 1700 miles so far so good. Had little experience with snow (live in south Jersey). I love this car and I'm glad I got it.
#31 of 219 Re: Chrysler 300 Owners: Problems & Solutions [jhterceira] by f15 Feb 12, 2005 (9:59 pm)
Replying to: jhterceira (Feb 08, 2005 3:42 pm) kinglab,   First off, you're reading a forum titled Problems & Solutions. You'd hear the other, much more common, story of complete satisfaction if there were such a forum. I have 6000 miles of pure pleasure and satisfaction on my 300C which has every option but the sunroof. I've had zero problems, I get superb mileage given the performance the Hemi provides, and have never driven a car that's such a joy to drive (I'm well into my fifth decade of driving), and I've driven all the large Euro sedans, and owned several.   Give the 300C a spirited test drive; you'll be hooked.
#32 of 219 Re: Chrysler 300 Owners: Problems & Solutions [jhterceira] by tubbybeeitch Apr 08, 2005 (4:53 pm)
Replying to: jhterceira (Feb 08, 2005 3:42 pm) My 300 was made in Canada So blame them
#33 of 219 Re: Chrysler 300 Owners: Problems & Solutions [docmark1] by ecampbell Aug 29, 2005 (3:51 pm)
Replying to: docmark1 (May 30, 2004 8:41 am) I had the same problems with a Dodge 2500. pulled to the left from day one. They replaced everything on the left side of the vehicle - nothing helped. I gave up after about 8 visits and just lived with it. Eventually, it pissed me off to where I tore it apart myself. Turned out that the problem was not an over-zealous left brake, but a weak right one! I replaced the caliper on the right and it has been stopping straight for the last 80,000 miles. Maybe it is the same with yours. Good luck!
#34 of 219 Re: Chrysler 300 Owners: Problems & Solutions [docmark1] by service Mar 29, 2006 (5:59 pm)
Replying to: docmark1 (May 30, 2004 8:41 am) service should have the tsb for the bushings are you riding on continental tires ?? if so don't waste your time have them replaced. its not an align problem its a tire problem prorated in canada. let me know how you make out               manager
#35 of 219 pulling to the right by jlm Jun 08, 2004 (5:01 pm)
same issue here. have about 1500 miles on my 300, dealership had the car for 8 days, claims to of tried everything. the TSB out there was useless, it did no good. they even had a regional rep come in the area (charlotte, nc) and still no fix. i took the car today because i honestly feel like the dealership exhausted all their options, but i'll give it a few days. ride home was very annoying veered right the entire time, just like when i brought it in, service manager's response was these cars are very sensitive and any flaw in the road will cause a veer. i'll give it a few more days before i take it in again. a brand new 30+k auto should not have an issue like this. Replies to this message: texas bob (Jun 09, 2004 6:03 am) arnoldw (Jun 09, 2004 4:15 pm) jlm (Jun 10, 2004 4:55 am) and 4 more... 300hemifl (Jun 14, 2004 5:32 pm) donnak1 (Feb 23, 2005 8:07 pm) decker3 (May 03, 2005 5:27 am)
#36 of 219 Re: pulling to the right [jlm #24] by texas bob Jun 09, 2004 (6:03 am)
Replying to: jlm (Jun 08, 2004 5:01 pm) I have a copy of the TSB; all 300's built before April 25, 2004 have the pull problem. Don't let your dealer blame it on something else. Time allowance in the TSB for completion of the fix is 1.7 hours, they really don't need a full day or longer. Again, it's TSB 02-003-04 dated May 25, 2004 Replies to this message: arnoldw (Jun 09, 2004 4:15 pm) jlm (Jun 10, 2004 4:55 am) arnoldw (Jun 10, 2004 2:59 pm) itshemi (Jul 09, 2004 6:40 am) and 2 more... 300hemifl (Jun 14, 2004 5:32 pm) donnak1 (Feb 23, 2005 8:07 pm) decker3 (May 03, 2005 5:27 am)
#37 of 219 Re: pulling to the right [texas bob #26] by arnoldw Jun 09, 2004 (4:15 pm)
Replying to: texas bob (Jun 09, 2004 6:03 am) NOT all 300s built before apr 25 have pull. TSB states drive the car on a FLAT road. IF the car tracks straight, the vehicle operator is experiencing crown sensitivity. My 300c was built apr 17...steers great. Test drove 2 other 300s before purchase and they were fine also. Replies to this message: jlm (Jun 10, 2004 4:55 am) arnoldw (Jun 10, 2004 2:59 pm) itshemi (Jul 09, 2004 6:40 am) jeep (Jul 09, 2004 3:02 pm) and 1 more...
#38 of 219 Re: pulling to the right [arnoldw #29] by jlm Jun 10, 2004 (4:55 am)
Replying to: arnoldw (Jun 09, 2004 4:15 pm) thanks for the info, my questions is then why does the car not pull to the left at times, not every road is crowned on the right side. i have driven on the flatest streets, and the pull is always to the right, i have even gone on the oppposite side of the road , where the the crown of the road is on the left side , and it still pulls right. Replies to this message: arnoldw (Jun 10, 2004 2:59 pm) itshemi (Jul 09, 2004 6:40 am) jeep (Jul 09, 2004 3:02 pm) barry626 (Jul 09, 2004 8:10 pm)
#39 of 219 Re: pulling to the right [jlm #30] by arnoldw Jun 10, 2004 (2:59 pm)
Replying to: jlm (Jun 10, 2004 4:55 am) Sure glad i've got one of the good ones. You'd think it would be a simple alignment to correct the problem. Hope they find a fix for your's and others soon so you can enjoy it like me! I wonder if a lot of these cars are like this?

Messages Page 4 of 22 1 2 3 4 5 6 7 ... 22 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Chrysler 300/300C/300C SRT-8 Chrysler 300: Alignment Issues