Chrysler 300: Alignment Issues

219 messages, Last post on Jul 19, 2009 at 2:25 PM

You are in the Chrysler 300/300C/300C SRT-8 Forum. Your Hosts are pat & karens

Messages Page 23 of 23: 1; ...; 17; 18; 19; 20; 21; 22; 23; Prev; Next; Last

#218 of 219 Re: Front End Shakes [varob] by damian1970 Jul 10, 2009 (9:27 am)
Replying to: varob (Nov 29, 2007 11:53 am) Had same Problem at same miles, have a look at your inner tie rod. I had to wait almost 7 weeks for my tie rod from the dealer very popular item. Let me know how it works out for you.
#219 of 219 Front End by jupes Jul 19, 2009 (2:25 pm)
Lift the front end off the ground. Chances are you will get wobble. The ball joint is connected to a shaft and you must buy it in one piece as it is an interdependant part. This is likely your wobble problem and most likely your pulling also. (crappy design.) If you don't have it repaired then your tie rods are soon to follow. I had to travel 2000 kilometers to get home and replace it and lord god don't hit the brakes at high speeds.