You are here: Forums Sedans Chrysler 300/300C/300C SRT-8 Chrysler 300/300C: Soft spot on floor driver side

Chrysler 300/300C: Soft spot on floor driver side

7 messages,  Last post on Dec 08, 2006 at 8:30 PM

You are in the Chrysler 300/300C/300C SRT-8 Forum. Your Hosts are pat & karens

What is this discussion about? Chrysler 300, Chrysler 300C SRT-8, Interior, Sedan

Messages Page 1 of 1 All Messages Displayed

Go To Msg # Search This Discussion

#1 of 7 Soft spot on floor driver side by chas63 Aug 13, 2006 (7:46 am)
Does anyone esle have problem of a soft spot on floor on driver side. I have a friend with the same 2006 Limited and he has the same problem; place is center left. Replies to this message: acrispy1 (Aug 15, 2006 5:55 am) canadacraig (Dec 06, 2006 3:18 am)
#2 of 7 Re: Soft spot on floor driver side [chas63] by acrispy1 Aug 15, 2006 (5:55 am)
Replying to: chas63 (Aug 13, 2006 7:46 am) I have an 05 touring and have a soft spot on the drivers side not sure why.
#3 of 7 Re: Soft spot on floor by jmcelwain Aug 16, 2006 (5:30 pm)
I have a 2006 signature series with the same soft spot issue. This car was built during Dec 2005. Replies to this message: 2volkswagens (Dec 03, 2006 2:41 pm)
#4 of 7 Re: Soft spot on floor [jmcelwain] by 2volkswagens Dec 03, 2006 (2:41 pm)
Replying to: jmcelwain (Aug 16, 2006 5:30 pm) I test drove one yesterday and noticed this too. Actually, I rather liked how the floor felt. I would think it would be comfortable on long trips when the cruise is set. I guess, since you guys are calling it an "issue", you think it is a defect. Have you had any satisfaction in sorting it out with your dealerships?   Regards, John
#5 of 7 Re: Soft spot on floor driver side [chas63] by canadacraig Dec 06, 2006 (3:18 am)
Replying to: chas63 (Aug 13, 2006 7:46 am) Hi chas63!! Do you mean the 'dead pedal'? Because IF that's what you're referring too - it's SUPPOSED to be 'soft'. At least that's how Chrysler intended it to be. Craig.
#6 of 7 Soft spot on floor. by jmcelwain Dec 08, 2006 (4:03 pm)
Mine soft spot is between the brake and the gas pedal about half way up the floor panel. You can feel it buckle with gentle pressure applied to the floor panel. Does not appear to be a problem, just odd that the floor appears to have a week spot there. Replies to this message: xtec (Dec 08, 2006 8:30 pm)
#7 of 7 Re: Soft spot on floor. [jmcelwain] by xtec Dec 08, 2006 (8:30 pm)
Replying to: jmcelwain (Dec 08, 2006 4:03 pm) I felt the soft spot on the same spot you mentioned,and I figured they are trying to keep the weight down on these cars and used a thin floorpan.I was suprised when I felt that,everything else feels solid.

Messages Page 1 of 1 All Messages Displayed

Go To Msg # Search This Discussion

You are here: Forums Sedans Chrysler 300/300C/300C SRT-8 Chrysler 300/300C: Soft spot on floor driver side