Last post on Oct 15, 2012 at 4:40 PM
You are in the Buick Rendezvous
What is this discussion about?
Buick Rendezvous, SUV
#86 of 115 2002 Rdw regulator Part #
Oct 12, 2008 (6:10 pm)
Does anyone have the correct Part # for the Front drivers side window regulator. I got a Part # for one from here but GMParts.com sent me a rear Pass. side regulator So i guess the part # that was listed here was wrong thanks for any help
#87 of 115 Re: 2002 Rdw regulator Part # [scotty6861]
Oct 13, 2008 (2:15 am)
What are the part number for the 2 clips on the driver side front? Also the passenger side front.
#88 of 115 2004 Rendesvouz Window Guides
Nov 04, 2008 (5:23 pm)
I had a friend replace the window guides on my 2004 Rendevouz, after he installed them the window would come up, yhe problem now is that the vehicle won't even start, it will not turn at all and nothing else is working to include a new satelite radio that I had just purchased and had install by Car toys.
Any advice will be geatly appreciated, I checked all the fuses and they seem to be fine. Please advise. I hate to go to the dealer because they will charge an arm and a leg and besides I cannot even get the car started not even when I put as jumper to it.
#89 of 115 2003 Buick Rendezvous
Dec 02, 2008 (8:18 pm)
I have read through this discussion and I am having an issue that hasn't been discussed...my window is stuck up thank god...and wont go down...but the motor is running when I press the button....is that the clips or more than likely the regulator??
#91 of 115 Re: 2004 Rendesvouz Window Guides [mel42]
Jun 05, 2009 (9:47 am)
Hey Mel, same thing happened to me when I replaced our little clips. worked like a champ through mounting/testing, then put the door back in place and...whammy. Dead electrical system. Did you ever get an answer on this?
#92 of 115 re 2002 rendezvous drivers door window
Jun 09, 2009 (1:38 pm)
Thanks all you guys and gals, I read with interest and bought the 2 parts from dealer ( $100 approx )( incl the dreaded tax! )
Only needed the back one it went on like a dream, then I broke the front one, it became more nightmare than dream. If I was an orangutan with 4 foot arms and a babies fingers it would be easy. but I found it was easier if I undid reguator and moved it to the rear, it gave more room to fit the clip on the small wire piece and then swivel the whole thing back to clip on the arm before replacing.
Next problem I have no roof rack just the gutters, can I fit any old bars and towers if so wherefrom or do I have to pay the price of GM and help out their bankruptcy!
#93 of 115 Re: re 2002 rendezvous drivers door window [flyingcol]
by steve_ HOST
Jun 09, 2009 (1:41 pm)
You have aftermarket options for roof racks - Yakima, Thule, Barrecrafters and Malone are rack companies that I can think of off-hand. Not all of them may make clips to fit your Rondy.
GM may be cheaper than some of these brands though.
#94 of 115 2004 F150 4x4 extended cab window problems
Jun 16, 2009 (12:29 pm)
I need help before I smash this bleeping thing!
Drivers side window will not come back up, and now I'm starting to have trouble with the window on the same side extended cab - but least I got it back up.
This morning I was trying to remove the drivers door inner panel, took out the two bottom 6 mm bolts, & then removed the two 8 mm door handle bolts. Started to remove in panel but stopped because it seemed like I was going to break some thing. Is there more to it to remove this panel?
I just wanna look inside & see if I can find the trouble.
Please does any one have any advice other than burn the truck? lol
#95 of 115 04 Rendezvous Front Passenger Window
Jul 11, 2009 (6:15 pm)
Okay...I've scanned through the 94 previous messages in this forum about Rendezvous power windows and, based on what several of you have said, this is something that can be repaired by the owner (me) and I can probably avoid the dealiership. A lot of the discussion in the previous messages related to "clips" and I'm hoping that replacement of broken clips will resolve my problem. But before I go to the trouble of taking the door apart, let me just describe what the window does and doesn't do. First off, it does not go up and down when I push the button (duh). It will, however, slide up and down if I put the window between my palms and push it up and down. Also, the window will slide up and down "crooked" (that is, not evenly). Is this consident with broken clips? Thanks in advance to anyone who replies.