You are here: Forums SUVs Buick Rendezvous How Do I replace power window regulator on 2004 Rendezvous?

How Do I replace power window regulator on 2004 Rendezvous?

99 messages,  Last post on Sep 18, 2009 at 7:09 AM

You are in the Buick Rendezvous Forum. Your Hosts are steve_ & tidester

What is this discussion about? Buick Rendezvous, SUV

Messages Page 8 of 10 1 ... 4 5 6 7 8 9 10 Prev Next Last

Go To Msg # Search This Discussion

#70 of 99 Re: plastic clips for windows [mikbee74] by gollywhopper Aug 28, 2008 (7:39 am)
Replying to: mikbee74 (Aug 12, 2008 5:33 pm) Ok, got the clips and installed them. Running it up and down the slide looks good prior placing it back in the door. Everything seemed fine and in working order, but when I got the door panel back on and ran the window up and down to test it several times, the cable kept coming out of the nylon clip. I know for certain that I had the ferrule on the cable properly placed in the nylon slot. Why does it keep coming out?     Is the window is binding somehow when being rolled down?   Any answers on this?   Thanks for your answer in advance!   ~jim Replies to this message: jereo (Aug 28, 2008 9:40 am) gollywhopper (Aug 28, 2008 9:58 am) racedad21 (Aug 28, 2008 4:13 pm) ace28 (Sep 09, 2008 6:30 am)
#71 of 99 Re: plastic clips for windows [gollywhopper] by jereo Aug 28, 2008 (9:40 am)
Replying to: gollywhopper (Aug 28, 2008 7:39 am) Push the little barrel in the clip HARD---you will hear it pop when it is on properly. Replies to this message: gollywhopper (Aug 28, 2008 9:58 am) racedad21 (Aug 28, 2008 4:13 pm) ace28 (Sep 09, 2008 6:30 am)
#72 of 99 Re: plastic clips for windows [jereo] by gollywhopper Aug 28, 2008 (9:58 am)
Replying to: jereo (Aug 28, 2008 9:40 am) Ahhh...that must be the secret! No wonder because I just sat that mug in there. Didn't know that it had use of force was involved.   ~jim
#73 of 99 Re: plastic clips for windows [jereo] by racedad21 Aug 28, 2008 (4:13 pm)
Replying to: jereo (Aug 28, 2008 9:40 am) YUP.....but don't break that cheap cheeszy clip by pushing too hard LOL.   jereo is correct, it will snap into place.   Good luck.   Gerald.
#74 of 99 Re: plastic clips for windows [jereo] by ace28 Sep 09, 2008 (6:30 am)
Replying to: jereo (Aug 28, 2008 9:40 am) I see the title was 2004 Rendezvous but all I saw mentioned in conversations was 2002 and 2003. Do the part number listed for the clips fit the 2004 also? When you go to GM direct to order, they do not come up under 04. Part #15286776 and 15286777.
#75 of 99 Re: well, well, well [racedad21] by carbine Sep 19, 2008 (6:41 pm)
Replying to: racedad21 (Aug 26, 2008 9:45 am) Well, I have a broken clip too   I finally figured out how to get the inside door panel off, and found the broken clip laying at the bottom of the door.   How do I get the whole assembly out of the door to replace the clips? Does it lift straight up and come out the top?   Thanks in advance! Replies to this message: racedad21 (Sep 20, 2008 2:13 am) carbine (Sep 20, 2008 11:04 am) racedad21 (Sep 20, 2008 3:40 pm) carbine (Sep 23, 2008 6:17 am) racedad21 (Sep 23, 2008 6:32 am) jereo (Sep 23, 2008 7:12 am)
#76 of 99 Re: well, well, well [carbine] by racedad21 Sep 20, 2008 (2:13 am)
Replying to: carbine (Sep 19, 2008 6:41 pm) Hey there. Pretty simple to pull out the whole regulator from the door. Once the panel is off, just remove the 4 or 5 bolts that keep it attatched to the door and pull it out through the big opening in the middle of the door. Don't try to pull it through the top, I don't think it would fit. Hey, I hope this helps ya! When you have more questions just ask.   Good luck,   Gerald. Replies to this message: carbine (Sep 20, 2008 11:04 am) racedad21 (Sep 20, 2008 3:40 pm) carbine (Sep 23, 2008 6:17 am) racedad21 (Sep 23, 2008 6:32 am) jereo (Sep 23, 2008 7:12 am)
#77 of 99 Re: well, well, well [racedad21] by carbine Sep 20, 2008 (11:04 am)
Replying to: racedad21 (Sep 20, 2008 2:13 am) Thanks for the advice.   I went to the dealership and they only had one clip in stock, and of course it's the wrong one. So I went ahead and bought it and ordered the other one, because I'm sure the good one will break soon.   Also, this whole device is the weirdest contraption I've ever seen. Who on earth designed this mess of a window opener?   I may be begging for more info once I get my hands on the parts and dig into it.   Thanks again! Replies to this message: racedad21 (Sep 20, 2008 3:40 pm)
#78 of 99 Re: well, well, well [carbine] by racedad21 Sep 20, 2008 (3:40 pm)
Replying to: carbine (Sep 20, 2008 11:04 am) Yeah, I couldn't believe it when I pulled the door apart. What has GM become? My pickup is a '97 and it seems to be built alot better.   Crappy design thats meant to fail. Oh well, thats life I guess.   Take care.   Gerald.
#79 of 99 Re: well, well, well [racedad21] by carbine Sep 23, 2008 (6:17 am)
Replying to: racedad21 (Sep 20, 2008 2:13 am) My clip is suppossed to come in today.   After the clips are installed, should I place the assembly back in the door, then drop the window into the clamps from the window slot above?   Will I be able to get to the clamps with the unit in the door?   Thanks Replies to this message: racedad21 (Sep 23, 2008 6:32 am) jereo (Sep 23, 2008 7:12 am)

Messages Page 8 of 10 1 ... 4 5 6 7 8 9 10 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Buick Rendezvous How Do I replace power window regulator on 2004 Rendezvous?