Taurus/Sable Brake Questions

20 messages,  Last post on Oct 26, 2010 at 1:26 PM

You are in the Ford Taurus/Mercury Sable Forum.

What is this discussion about? Ford Taurus, Mercury Sable, Brakes, Sedan, Wagon

#13 of 20 Re: hummm, [alli3] by callen66

Nov 29, 2007 (9:09 am)

Replying to: alli3 (Jul 10, 2007 5:28 pm)
Did you bench bleed the master before putting it on and then bleed all four others after? Are the pads in good shape? Any visible leaks?

#14 of 20 constant abs brakes by musky2

Mar 31, 2008 (5:44 am)

this is for a 2000 sable with 75000 miles. i had the car in the garage a while back having the abs system checked out, for which i was told every thing checked out. my problem is the abs system goes on almost all the time now when applying the brakes or if i run over a small bump when braking. the rotors and pads are in good shape. do the abs brake sensors go bad? or is it something else?

#15 of 20 brakes by muncy

Aug 27, 2008 (10:12 am)

have changed front rotor and calibers on front and now brakes are sticking and getting real hot whats the problem on my 1996 ford taurus,,,,,help

#16 of 20 Whining brake pad by robertsmeets

Apr 14, 2009 (7:39 pm)

I have replaced rotors and pads on my wife's '99 Taurus Wagon and seem to have a problem with the outer pad on the driver side. Once the car gets up to about 25 mph the pad starts to whine. At first I had the metallic pad in there with a metal shim, it makes a horrible sound. I replaced it with a ceramic pad with a nitrile rubber coated shim, the noise is less but is still there. I have taken the brake assembly off several times and checked the pads, slides, springs, everything seems to look good but i just can't get away from that darn whining. I have the same setup in my '98 Taurus and have no problems there at all ......... any suggestions?
 
 

#18 of 20 93 Sable parking brake release cable by thomasoregon

Jun 30, 2009 (10:00 am)

Does anyone know how to disconnect the old parking brake release plastic housing from the dash? The new one looks like it is held in with a clip but you can hardly see it behind the dash much less get a pair of needle nose in there.
 
Thanks.

#19 of 20 need exploded view 03 Sable rear shoe brakes by arowhead

Aug 11, 2009 (6:56 am)

when I removed then they came apart with some pieces off. I need to see how they go back together. I have done many brake jobs in my life. this is the worst one so far

#20 of 20 Pulsating Brakes in 2000 Sable by stephkenner

Oct 26, 2010 (1:26 pm)

I have a 2000 Sable station wagon. When I apply the brakes, the 1st few times in the morning, the pedal pulsates a few time & then I hear an electric motor going. After a few times of doing this, it goes away. We've replaced the pads on the rear & put a new caliper on. The front pads were replaced in Feb. Does anyone have anyone idea what it is or what's causing it?
 
 
To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement