Sign In Join 



Isuzu Trooper Maintenance and Repair

313 messages,  Last post on Nov 23, 2009 at 5:10 PM

You are in the Isuzu Trooper Forum. Your Hosts are steve_ & tidester

What is this discussion about? Isuzu Trooper, Isuzu Trooper II, SUV


Messages Page 26 of 32
1
...
23
24
25
26
27
28
29
...
32
Prev
Next
Last
Go To Msg #
Search This Discussion

#248 of 313
Re: Turn Signal & Light problems [d_jray] by rearwheeldrive
Oct 31, 2008 (2:08 pm)
Reply

Replying to: d_jray (Oct 30, 2008 6:08 am)

Id go back to the beginning get the part number for the bulb and then check it against your van. Autozone should have these manuals to verify part number.
#249 of 313
Re: Ignition Wires for 93 Trooper sohc [tambra] by rearwheeldrive
Oct 31, 2008 (2:09 pm)
Reply

Replying to: tambra (Oct 31, 2008 12:45 pm)

Theres no such thing as sealing plug wires. Your valve cover gasket is old and needs replaced.
#250 of 313
Re: Ignition Wires for 93 Trooper sohc [rearwheeldrive] by tambra
Oct 31, 2008 (4:33 pm)
Reply

Replying to: rearwheeldrive (Oct 31, 2008 2:09 pm)

Yes there is...there is a flaw in the engine design so Isuzu made a better wire that has a bushing on the end that prevents the oil from seeping up into the spark plug wire....I know my gasket and rings are bad on a couple, but not really enough to go through the expense of changing it all out. The vehicle only has 100,000 on it. Getting the wires is an upgrade that is needed anyway and will be a solution to the problem for awhile. Thanks for trying to help though. Take Care.
#251 of 313
Re: Ignition Wires for 93 Trooper sohc [tambra] by rearwheeldrive
Nov 06, 2008 (11:11 am)
Reply

Replying to: tambra (Oct 31, 2008 4:33 pm)

Hi sorry for telling you no such thing exist.
It sounds like someone is giving you the run around, but you mention something about gaskets and seals . I dont work on these vehicles but responded because my email gave me an alert for this vehicle probably from a past topic.
 
I went on Autozone site for manuals. They group the repair under one heading for all Isuzu vehicles so Im guessing you have the V6 3.1 or 3.2 liter. Again I cant even make out the pictures but it looks like distributorless ignition like my Q-45. The coils mount right on top of the spark plug. There is no wires in this type of ignition usually. Without seeing it in person I guessing oil is on this part. I replaced the O- rings on my Q-45 when I saw oil on this part. It required the valve cover removal I done a bunch of these over the years and is a great do it yourself repair if you want to save yourself a lot of bucks$$$$. Someone will eventually respond to your specific problem who is more familiar with this vehicle.
#252 of 313
1989 Trooper by jellyfish2
Nov 06, 2008 (4:36 pm)
Reply

Replying to: tidester (Jul 31, 2006 8:24 pm)

HI out there...................
I have the above Trooper with the 2.6 liter 4 cylinder, when I start it up it will run for awhile but then if I shut it off It will start but not stay running, and only run for a couple of seconds. I just put gas in it because I thought that was the problem but it is still doing it. I read down the line and it sounds like the same problem that someone else is having but I am not sure. Do I need to change out some sensors? I think I saw something about CO sensors?What is the ECM and what does it look like and could there be some error codes in the brain box(ECM?)??Any help would be greatly appreciated. Thanks Jellyfish2
#253 of 313
2001 Isuzu Trooper: over heating problem by kunle1
Nov 07, 2008 (12:38 am)
Reply
This car was bought a used car and was imported into Nigeria, Africa last month. Since it was bought, i've been experiencing overheating problem, so i had to change the Radiator from single cell to double cell; still, the problem still persists. i noticed that the fan rolls clock-wise while the 1994 isuzu trooper rolls anti clock-wise. I also noticed that the fan is not blowing air into the engine but out. Could it be that the fan is wrongly placed or it is not the fan for the model? (2001 Isuzu Trooper)
#254 of 313
adjusting valves by climberman
Nov 07, 2008 (6:34 am)
Reply
I have a 1996 Trooper and the there is a ticking noise. I have changed the oil twice put in additives no change and I switch to synthetic oil. Everyone is saying that you can adjust the valves is there any instructions on how to do that?
#257 of 313
Replacing a water pump on a V6 1991 trooper by WindPig
Nov 21, 2008 (4:52 pm)
Reply
Need Help ASAP
Hi I have a 1991 V6 Isuzu Trooper Auto. I need to replace the water pump cause it is leaking. Can someone tell me what size star socket I have to get to take off the bolts holding the water pump on. I have not done this on a trooper before what is the process and do I need any special tools. Also do I need to replace anything else ( hoping to use the belt cause I think they are pricey) while I have the pump off? Any help would be appreciated.
Thanks

Messages Page 26 of 32
1
...
23
24
25
26
27
28
29
...
32
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement