Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups Toyota Tacoma Toyota Tacoma Transmission Problems
325 messages, Last post on Nov 23, 2009 at 6:12 PM
You are in the Toyota Tacoma Forum. Your Host is kcram
|
|
|---|---|
|
Replying to: fayettevillain (Nov 09, 2008 6:26 pm) 
|
|
|
Replying to: beach_brada (Jul 25, 2006 11:00 am) |
|
i just bought a 2009 tacoma automatic and it slips in either first or second gear it winds out to about 3,200 rpms before it goes into gear
|
|
|
I have a 2007 Tacoma FWD with auto transmission. It appears to clunk into low gear at a stop, after the stop is completed, and pressure is slightly released from the brake pedal. It's not a real problem now, but I had a 2005 Tacoma FWD, that did the same thing and continually got worse. The clunk got to a point it would produce a mild jar to the occupants, whenever pressure was slightly released off the brake. The dealer called it a "driveline wrap" and nothing could be done about it. Drive line wrap being when the axle was in a torqued condition and torque/tension was released after the brake petal was slightly released. Has anyone ever experienced this clunking, or problems downshifting to low with an auto transmission?? |
|
|
My 1995 Tacoma has 122,000 miles. About 8 weeks ago, I began having trouble with first gear. Basically, when I was starting out from a stopped position (like a stop sign), first gear would slip out of gear and the truck would make a loud noise while jerking once violently. This occurred about once a week for 3 weeks. In the 4th week this problem began to occur very frequently and happened at every other stop sign. This first gear problem stopped when I decided to hold first gear in gear with my hand while driving. In other words, first gear was fine as long as I applied pressure to the gear stick while it was in gear. In the 5th week, third gear began acting up. Basically, when shifting to third, the gearbox would grind loudly and kick the gear stick out of gear. It felt as if the gear box was refusing to accept third gear. The following week (week 6) first gear was fine but I could not shift into third gear. The gear box refused to accept third gear. In response, I bypassed third gear for 2 weeks and shifted from second gear to fourth gear without any problems. At this point all of my gears were working fine except for third gear. In week 8 (which was 3 days ago) while carrying a heavy load in my truck bed, I decided to try out third gear once again. This time third gear worked fine. I have been using third gear for 3 days now and it feels fine except for one thing: it still does not feel like it is completely locking into gear. In other words, it feels a little spongy. Currently, I am driving my Tacoma with all 5 gears plus reverse. They are all working fine for now, but I am puzzled about this gear box issue. Any help would be greatly appreciated 
|
|
|
Replying to: Cwasp (Jan 28, 2009 2:58 pm) |
|
|
|
|
Replying to: Cwasp (Jan 28, 2009 2:58 pm) |
|
|
Over time, I have to press the clutch pedal to the floor for the engine to start. It's not the clutch, the clutch is working fine once the engine's running. There has to be a safety switch - Where is this switch? and is it adjustable? ManN
|
|
You are here:
Forums
Pickups Toyota Tacoma Toyota Tacoma Transmission Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2011 Toyota Tacoma
Browse by Board
Browse by Topic
Today's Chats
