Chrysler Pacifica Audio & Entertainment Questions

255 messages,  Last post on Dec 28, 2012 at 8:41 PM

You are in the Chrysler Pacifica Maintenance & Repair Forum.

What is this discussion about? Chrysler Pacifica, Audio, Wagon

#246 of 255 How to Install Off-Market DVD Monitor to Chrysler Pacifica by chez6

Feb 18, 2011 (6:45 am)

This almost drove me insane due to the simplicity of the situation, but yet made so complicated by Chrysler. You can now purchase any headrest or center monitor and have it installed directly to the DVD system without having to purchase an expense wire harness from the dealership. What we did was remove the DVD system and on the top it has a diagram for a 12 pin and a 16 pin connector.
 
The 16 is used to power and connect the dvd to the vehicle and the 12 pin is set up to take your factory screen. What we did was simply connect a RCA Video input to the number 6 (Video Signal) using a 3/16" Insulated Quick Disconnect. We striped the rca wire, connected it to the QD, then cut it in half, tighten it a little to fit directly into the video signal pin; also glued it so it would stick.
 
You can also set up the audio using the same method so you can utilize a headset, but you will need the remote which is about $60 at Chrysler to enable it.

#247 of 255 Wiring diagram by jeffyman

Jul 04, 2011 (6:12 am)

Can someone tell me why after replacing the factory stereo with an aftermarket my speakers do no work. I also installed the wiring harness to adapt the new stereo to the existing harness but I am getting no sound. Please help! Oh yea, it is a 2007 Pacifica Touring with the standard AM/FM single disc cd. 7 speakers including the center channel speaker the middle of the dash. No sub that I'm aware of but may have a seperate amp for all speakers????

#248 of 255 Speakers cutting out by slayerkrze

Jul 29, 2011 (1:28 pm)

I have a 2006 Chrysler Pacifica Touring and when ever I have my car phone charger plugged into the ignition power port, the speakers cut out at random times and remain out for random lengths of time too. What could be causing this?

#249 of 255 Used 6 Disc CD/DVD Changer Needs Reprogramming by tony6435

Feb 24, 2012 (6:51 pm)

I have a 2005 Pacifica. I removed the factory installled (malfunctioning) disc changer P05094031AA and installed a used changer (same model) It ejects the disc after 1-2 min of trying to read it and displays ERROR in the radio display. Does the changer require reprogramming to work or is it malfunction also?

#250 of 255 Dvd Problems by jessi3

Apr 24, 2012 (11:08 am)

Hi i have a 2005 chrysler pacifica touring that has all the works, including the in-dash 6 DVD/CD changer. i have owned this car for a year now and everything has worked fine intill a few months ago my battery went dead and i jumped my call and then all of a sudden by dvd changer stoped working that lights still come on but when u eject the dvds it just clicks and says error also when u try and play a dvd.... i have looked everywhere for help on this and have found nothing can someone please help!!!!

#251 of 255 Re: How to Install Off-Market DVD Monitor to Chrysler Pacifica [chez6] by cee3peo

Jul 15, 2012 (3:16 pm)

Replying to: chez6 (Feb 18, 2011 6:45 am)
Hi there,
I like your idea to use a 3/16" Insulated Quick Disconnect and cut it in half so you have a pin to plug in to the inside of a Female RCA connector. I did just what you posted by connecting to the #6 (Grey/Orange) Video signal. Question though. That only connects the video signal. What about the outer ring on the RCA connector? What wire from the 12-pin harness did you connect and how?
Thanks!

#252 of 255 Re: Help with radio [chrysler2004] by pacificha

Sep 03, 2012 (4:34 pm)

Replying to: chrysler2004 (Nov 05, 2009 10:22 am)
My 2005 just started this same exact issue. It's been so long since someone posted to this, but how did you resolve this issue. What was the problem? Was it a fuse, loose wire, bad radio or amp?

#253 of 255 Re: Help with radio [04pacman] by pacificha

Sep 03, 2012 (4:42 pm)

Replying to: 04pacman (May 14, 2009 9:39 am)
My 2005 Pacifica started this same problem a couple months now and I am trying my best not to a whole new system. How did you ever resolve this issue? Was it a fuse, bad radio? Help anyone? By the way, no amp in the right back or under rear compartment? Where else can it be?

#254 of 255 2004 Pacifica with no radio sound - new twist to an old problem by qckslvr

Dec 03, 2012 (6:26 pm)

Hi. I sure hope someone can help me with this problem before I pull all my hair out!
 
I, too, have a 2004 Pacifica with all the bells and whistles. Brought it new in April, 2003. I recently returned from an extended vacation to find the battery in the car dead. I charged it overnight and everything seemed happy the next morning. Everything, that is, except for the radio and entertainment system. Now the radio powers up and displays stations, disc tracks and tape position indications, but without sound. The DVD system projects video on the screen, but also without sound (although I CAN hear DVD audio through the headsets).
 
I've read of many others who have also experienced this problem, but here's the "new twist" I have never seen reported before: The radio controls on the steering wheel are now also inoperative, and the radio (RBP) no longer accesses the factory 6-disc changer. Pressing the "Mode" button selects either the tape or single-disc player (without sound), but never goes to the multi-disc changer. Everything else in the car (Nav. system, cruise control, etc.) functions normally.
 
I've checked all the underhood fuses, and I've removed the radio and had it bench-tested. No problems found. I've also tried a replacement amp. (boneyard) and still no sound. I'm pretty much at my wit's end at this point, and very frustrated. BTW, I've spoken with five different dealer Service Managers, and each has said he's never heard of this problem before. Seems a little odd.
 
Any advice would be greatly appreciated. Thanks in advance.

#255 of 255 Re: 2004 Pacifica with no radio sound - new twist to an old problem [qckslvr] by qckslvr

Dec 28, 2012 (8:41 pm)

Replying to: qckslvr (Dec 03, 2012 6:26 pm)
Problem solved! It turned out to be the radio, after all. I replaced the original with a salvaged unit, and everything works again.
 
Hope this may help others.
To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement