Last post on May 01, 2013 at 8:10 AM
You are in the Chrysler Pacifica Maintenance & Repair
What is this discussion about?
Chrysler Pacifica, Navigation System, Wagon
#87 of 100 Re: Need help with my nav screen, Help Please [khmrizek]
Feb 09, 2011 (7:44 am)
hey it seems i have the same problem with the car i got a new back unit meaning the nav dvd drive and i hooked it up no power so iunno what to change i checked for power lines there seems to be one line where im getting a shortage of power
#88 of 100 2004 Pacifica Nav system panel
May 23, 2011 (4:01 pm)
My son borrowed my Pacifica and when he returned it the "Step" button on the control panel was damaged. It looks like it was pushed so hard tat the support under the button snapped. I am now unable to scroll through the "menu" to reset anything or change the readout on my dash. Has anyone else had this happen and if so can this be repaired or do I need to replace the module? I am not very happy right now. The nav system still works I just can't reset anything.
#89 of 100 Re: My Nav stopped too [abercrombiejim]
Jul 12, 2011 (8:53 pm)
Interested in finding out if you ever found a solution to this problem? My 2007 PAC'S nav turns on, lets me program, etc... however, when I am driving, it continuously tells me to do a U turn and is off route - it seems to be in the vicinity of where I really am... however is usually going the wrong way! I have ordered an update disk (last year's for only $50 because it has the original disk, and I don't want to invest a lot chasing after the wrong answer).
My other problem is that the voice sounds like it's constantly cutting/shorting out and the volume is VERY low (although set at 5). Any suggestions?
#90 of 100 short in speaker? voice not working properly
Jul 12, 2011 (8:58 pm)
I have set my voice settings at 5 (highest) however it is barely audible and what you CAN hear sounds like it is coming from a busted speaker or that has a short in it. Any suggestions as to where to start troubleshooting?
#91 of 100 Re: My Nav stopped too [mmcritter]
Jul 13, 2011 (5:45 am)
i am still looking for a disk to update to current version. can you send me a link from where you bought a disk for $50??
#92 of 100 Re: My Nav stopped too [mmcritter]
Jul 13, 2011 (6:47 am)
When the Nav stopped working in my 2004 Pac, it was under warranty and the system, in the rear storage area, was replaced. Since then it has continued to work. Now, when it comes to updating with a new DVD for $200.00, I refuse to do that. I consider it a "rip-off". It's just a money maker. I have purchased a TomTom for under $150.00 which stays up to date and has more features than the Pac in-dash system. If I go to a rental car, the TomTom goes with me. If Chrysler drops their DVD price to, say, $25.00, then, maybe - but not at $200.00.
#93 of 100 Re: My Nav stopped too [jmeta]
Jul 14, 2011 (8:59 am)
I found it on ebay.com - it has a letter I at the end of the disk code... most recent one is J
#94 of 100 Re: My Nav stopped too [jmeta]
Nov 30, 2011 (8:13 am)
E-bay is a pretty good source.
#95 of 100 "04 Pacifica navation not working
Feb 19, 2012 (2:12 pm)
The navigation system on my Pacifica '04 is not working - dealer said to buy new disk, I did but still not working- returned disk to dealer, they said the unit is dead-- need to buy a new navigation system for $450- plus new disk $200! anyone know if they can be rapaired? where? I am in Los Angeles, California
#96 of 100 Re: "04 Pacifica navation not working [gsaonline]
Feb 19, 2012 (2:41 pm)
My Pacifica is also '04. My navi died while it was still in warranty. Dealer tried new disc first - didn't work. They ordered new unit for me. Cost me a $50.00 deductible (and didn't include an updated disc). They told me if not in warranty, would cost $1,000.00.
Even now, with it working, I won't pay the $200.00 for an updated disc. For $150.00 you can buy a nice 5" TomTom (or other) with lifetime updates. An updated disc for $200.00 is a ripoff.