Last post on May 01, 2013 at 9:10 AM
You are in the Chrysler Pacifica Maintenance & Repair
What is this discussion about?
Chrysler Pacifica, Navigation System, Wagon
#57 of 100 Re: My Nav stopped too [abercrombiejim]
Jan 14, 2008 (7:10 pm)
Gee, too bad I did not extract my NAV DVD player from my 2005 touring as I had installed it in preparation for the day when I would install all the other NAV components I got off aof a wrecked 2005 - but I forgot to do that. Sort of sounds like the DVD player is on the blink.
#58 of 100 AfterMarket DVD Navigation
Feb 09, 2008 (5:08 pm)
Can someone tell me how much room there is in the dash of the 2005 Pacifica please? I would like to install the Panasonic Strada CN-NVD905U and would like to know if anyone has gone this route (pun intended) before.
Thanks in advance for your help.
#59 of 100 Chrysler NAV Dead
Mar 21, 2008 (6:54 pm)
No Chrysler logo on Boot
after a minute it says
Please do not turn engine off
never leave that mode
thiis happened when attempting an upgrade from ae to af dvd
will this require a factory reset ?
what does that entail.
rmoval of dvd player or something else??
#61 of 100 Pacifica Nav system locked up
Jul 01, 2008 (11:55 am)
Nav system was working last time I had it on, then today when I turn it on it tells me it is loading CD Rom. After this idles for extended period, I eject disc and re-insert. Now it just says it's "loading" Does this mean that my disc is out of date (2005 Model)? Will an old disc simply stop working at some point in time?
#62 of 100 Nav system in my 2004 Pacifica died
Aug 19, 2008 (4:02 pm)
Because of an operation, I was not able to drive for six weeks. Before going into the hospital, the nav system worked perfectly. When I started it up, after the six weeks of sitting, I got the message that it could not read the DVD-ROM.
The Chrysler logo comes up and I can use the "step" button to change the display on the dash as well as the mi/km button, but no navigation system. I tried blowing out the drive. Also, I disconnected the battery for about 10 minutes to try a "reset". That didn't help I did take the disc to a computer and the computer shows that there are files on the disc.
#63 of 100 Re: Pacifica Nav system locked up [montez1]
Aug 20, 2008 (4:09 pm)
I have just had a similar experience with my 2004 Pacifica. The message says "loading cannot read DVD-ROM".
Did you ever get a solution to your problem?
#64 of 100 Can't read DVD-ROM -- Follow up.....
Aug 21, 2008 (3:29 pm)
As a follow-up to my post of Aug 19, today, I went to my Chrysler dealer. They had another DVD. We tried it and the same message appeared that it could not be read. So, it would appear that the problem is not the disc but is the disc drive itsself.
So, has anyone had any luck in repairing or replacing the DVD drive?
Sort of irritates me - car is a 2004 -- yes, 5 years old but I only have 31,000 miles. Seems the system should last longer than 31,000 miles.
Thanks, in advance, for answers.
#65 of 100 How do I change the language from spanish to english
Aug 24, 2008 (7:48 am)
I recently bought a used pacifica - very satisfied with the ride experience. The only problem I can't figure out how to change the language from spanish to english. Can somebody help me?
#66 of 100 help needed to change the language of the instrument panel
Aug 24, 2008 (8:05 am)
I bought this pacifica with low mileage and great ride experience from a Toyota dealer in California - the only thing is we can't figure out how to change the language from spanish to english. Hellp me figure it out please. Thanks.