606 messages,
Last post on Mar 31, 2013 at 7:23 PM
You are in the
Ford F-Series Forum.
What is this discussion about?
Ford F-150, Ford F-250, Ford F-350, Transmission, Truck
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#511 of 606 Re: F-150 1999 [kyislander]
by pickles1
Feb 11, 2011 (5:02 pm)
yes, we were told by the auto shop that we needed a new transmission for 4 grand. So we bought one at a wrecking yard and had it installed for a total cost of 1150.00 Trans. and labor. It ran fine for a few days and then it made the same sound and broke down. Had it towed to Ford Dealer and now they said we need a whole NEW ENGINE! Only 80k miles on this truck. Called ford back east and waiting to see if they will help out with repair. Dealer quoted new engine 5800.00 This is a nightmare. I dont know who to believe.
#512 of 606 Re: 5 speed manual tranny [robert31757]
by jeferywaterson
Feb 20, 2011 (5:48 pm)
I am having similar problems with my 89 F-150 5 spd.Check you Master Cylinder,see if it is dry.Look around the area where the fluid line goes in the slave on the side of the trans.,look for leaks.If it up and just started,not very likely it is the clutch.
I just changed the master cyl.,slave cyl.,clutch pressure plate,and I have about half the clutch it takes to be able to engage the gears.I need help with bleeding.I have taken the trans.out 3 times,still no clutch.Let me know if that helped ya any.Jeff..
#513 of 606 5 speed od manual trans.new master,slave,clutch,good pressure plate,won't
by jeferywaterson
Feb 20, 2011 (6:52 pm)
#514 of 606 5 speed od manual trans.new master,slave,clutch,good pressure plate,won't
by jeferywaterson
Feb 20, 2011 (6:52 pm)
Clutch won't work.Bleed like brakes,found bad o ring at base of slave,replaced,still no clutch.First time I've done a bleed on slave cyl..Feels like air in system,but no bubbles at bleeder on slave.Master sits level..Put another used trans.in cause broke old housing taking out,one piece housing.
help????????
#515 of 606 Re: 2005 F150 Transmission problem [pickles1]
by tmillsap80
Mar 30, 2011 (5:44 am)
Same thing happen to mine it turn out to be the transmission clutch.
Mar 31, 2011 (3:51 pm)
hi i have been having problems with my ford f150 supercrew lariet. hearing these clunking noises in the transmission and driving to work the other day and kept grinding wouldnt move had to have it towed and found out i need a new transmission a gear blew and was all in pan has anyone ever wrote to ford about this and what was the out come of it. thank you iam so upset now just got it paid off and this happens. its a 2002 by the way
#518 of 606 2005 F150 v6 auto transmision slipping
by rommel2
Apr 14, 2011 (5:13 pm)
Things are going like the old Hee Haw song, "Gloom despair and agony on me..." 78k miles and trans seems to slip when at slow speeds during acceleration. Lost my job and really can't afford mechanic. Did have the transmission fluid changed, still slips. Any suggestions? Yes, i'm looking for work and no not as a mechanic.
Apr 18, 2011 (9:14 am)
I have a 2002 F150 4.6L V-8 with over 160,000 miles in it. It is having trouble with accelerating. Unless I'm going downhill, I'm lucky to get it to go over 35MPH. It also does not want to go uphill. I tried starting it off in 1st, then shifting to 2nd, then to Drive which worked pretty normally until I put it in drive when it just seemed like it didn't want to shift into 3rd. I have actually had the pedal to the floor going uphill and not much response, not even higher RPMS. It has an automatic transmission and I have had the transmission fluid checked (it was clean and at the appropriate level). Also had the components on the underside and under the hood checked out and all looked good visually. It had been having trouble prior to this for a couple of months with up shifting on the interstate at about 70MPH and has had a coolant leak for about a month or so in a hose near the heater core. Anybody have any ideas?
#520 of 606 Re: 2005 F150 v6 auto transmision slipping [rommel2]
by trlrtrash
Apr 24, 2011 (7:34 am)
You might try adding a bottle of transfer case stop slip fluid. It's designed specially for transfer cases and is a blue fluid in a small (about 2 ounces) bottle. worked great in my tranny.