Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups Ford F-Series Ford F-Series Transmission Problems
431 messages, Last post on Mar 20, 2010 at 3:32 PM
You are in the Ford F-Series Forum. Your Host is kcram
|
Replying to: puddlejumper4 (May 21, 2007 7:21 pm) |
|
|
|
my 91 f150 4x4 started running bad a while back and one day while attempting a pass on the interstate she went bang and the overdrive stopped working. It will go through all three other gears with the "od off" button depressed but its kinda rough and it shimmies really bad in 3rd at about 30 to 40 mph.is there a fix that can be done with tranny in truck? Money -is- an issue so any advice you can give would be great.I recently had the truck on a diagnostic machine and didn't see any codes for tranny but I was looking for why the truck is running so bad but I heard also that the tranny might be making the engine run bad because of some piece of electronics that has to do with trans preasure????? Please advise.
|
|
|
Replying to: farmtruck4 (Dec 01, 2007 3:20 pm)
|
|
|
|
|
Replying to: cowboy9 (Dec 01, 2007 3:29 pm) |
|
i have a 1997 f350 power stroke diesel, having problem with reverse, is there an linkage adjustment on the tranny? first it was just hard getting it into reverse now wont go at all. talked to my son who put new tranny in year ago, said he adjusted linkage, but i can't find one. any advise? thank kprouty
|
|
| The 4x4 light came on while I was in stop and go traffic, this was followed by a single clunk. The transmission is now stuck in low gear and there is no response when shifting the drive selector switch. Any ideas? | |
|
|
|
I have a 1994 E.B. Bronco that stalls when you put it in reverse it feels like the torque converter is locking up and stalling engine it started doing this only in reverse but now it happening in drive I can power brake it untill the convertor unlocks  about 1500 rpms then it will idle fine in gear motor is new and runs perfect otherwise transmission was recently rebuilt problem didnt start untill i changed engine.only codes that come up is tps sensor low voltage just dont know where to look trans or computer? any body have sim. prob / solution thanks
|
|
|
Replying to: fordmangt350 (Dec 19, 2007 6:39 pm) Was there any gap between the Flywheel and the torgue converter when bolting the 2 together or was it real tight and you had to force the tranny onto the motor ?
|
|
|
|
|
Replying to: cowboy9 (Dec 19, 2007 6:49 pm) if I unplug harness and restart engine it sometimes acts right for a little while but that still dont tell me if its trans or computer |
|
You are here:
Forums
Pickups Ford F-Series Ford F-Series Transmission Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Ford F-150
1999 Ford F-250
1997 Ford F-350
Browse by Board
Browse by Topic
Today's Chats
