You are here:
Forums
Pickups
Dodge Dakota
Dodge Dakota Climate Control

129 messages, Last post on Sep 20, 2008 at 11:40 PM
You are in the Dodge Dakota Forum. Your Host is kcram
Today i went to use the A/C and it would only kick on when the fan was on High. Did some checking and the fan does not work at all only on the High setting. Do i need to replace the whole climate control unit or not to fix this.
|
|
|
|
| Your problem is that the variable resistor needs to be replaced. It is behind the glove box and costs around $20 from the dealer. It is an easy do it yourself job. You might want to do a search on this forum as this has come up very frequently in the past. | |
|
Replying to: ironcity1 (Jul 10, 2008 4:43 pm)
|
|
|
Replying to: dakota968 (Jul 11, 2008 10:23 am) |
|
First time user. When the heater or A/C is on and blowing, it only comes through at the windshield, no matter what button I push. I was able to go under the dash and find a box that when I put my hand inside and pushed on a door to open, then the air come through the cab. When I released the door it shut and the air went back to the windshield. Thanks for any help.
|
|
|
Replying to: moretin (Jul 23, 2008 11:02 am) kcram - Pickups Host
|
|
|
Replying to: kcram (Jul 23, 2008 7:14 pm) |
|
|
How difficult is the switch on the compresser to replace? I have done everything else I can think of on my '92 4x4 3.9l, but cannot get the unit to run consistently. Everything includes: Retrofit (r134),low pressure switch, O rings, and curcuit breaker.
|
|
|
Replying to: cpklutz (Aug 27, 2008 2:28 pm)
|
|
|
Replying to: ejwells (Jul 03, 2008 1:02 pm) |
|
You are here:
Forums
Pickups
Dodge Dakota
Dodge Dakota Climate Control
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2009 Dodge Dakota



Browse by Board
Browse by Topic
Today's Chats