Sign In Join 



Chevrolet Tracker Maintenance and Repair

143 messages,  Last post on Nov 27, 2009 at 1:17 PM

You are in the Chevrolet Tracker Forum. Your Hosts are steve_ & tidester

What is this discussion about? Chevrolet Tracker, SUV


Messages Page 15 of 15
1
...
9
10
11
12
13
14
15
Prev
Next
Last
Go To Msg #
Search This Discussion

#138 of 143
Re: camshaft timing marks [bherried] by steve_ HOST
Oct 10, 2009 (2:05 pm)
Reply

Replying to: bherried (Oct 10, 2009 1:24 pm)

Try the Climate Control Problems (Air Conditioning, Heat) - All Cars discussion.
 
It's quiet over there too but lots of people subscribe to that discussion and watch it.
#139 of 143
Re: Service Engine Soon Light [trackergal37] by terry9643
Oct 11, 2009 (2:45 pm)
Reply

Replying to: trackergal37 (Apr 21, 2008 9:57 am)

I'm having the same problem. First it was the gas cap and now the o2 sensor, do you know where this $18 pigtail valve on the exhaust system is or where I can buy one and change it myseft.
#140 of 143
Re: Service Engine Soon Light [terry9643] by euni
Nov 03, 2009 (1:42 pm)
Reply

Replying to: terry9643 (Oct 11, 2009 2:45 pm)

I have the same problem. I already replaced the o2 sensor. Now the second sensor is need of replacement. I have a 2001 tracker. Right now my left rear brakes literally fell apart. The shop is now looking for a part they say GM has on national backorder. My tracker has been in the shop for four days now.
#141 of 143
Re: 2002 5-door tracker, with broken suspension rod?? [floody2] by donram
Nov 13, 2009 (9:00 am)
Reply

Replying to: floody2 (Sep 21, 2009 4:58 pm)

Sorry about the late reply. I should visit more often. I got the links at BENSON Autoparts in the Ottawa area and yes, they were $30 tax included.
#142 of 143
Power steering by cdl2
Nov 15, 2009 (4:59 am)
Reply
My power steering just went out. 2000 5 door 4 wheel drive. It gets better as the RPM's go up. New pump is $125, I'd like to get a rebuild kit. Amybody know where I can get one?
Also my steering rack is leaking. $500 for that!!!!!
#143 of 143
02 tracker 2.5 v6 head gaskets by rsbagley
Nov 27, 2009 (1:17 pm)
Reply
I am trying to pull my 2.5 engine apart to replace head gaskets.. I have never worked on this type of engine before.. When i got the valve covers off. i was surprized to fine 3 timing chains.. found a manual for this engine and it has all the proceedures to align the marks up.. I have turned this engine over at least 80 revs and finnaly got the main chain three marks aligned. But the other two that align the cams to the main chain are not.. I guess my question is does all the marks on all chains have to be aligned at same time? The manual has a proceedure for each chain. But no where does it say all have to be aligned at same time. I have all three marks aligned for main chain.. is this where i start and just do the other procedures and align the keys to match the main? Please help Thank you Roland

Messages Page 15 of 15
1
...
9
10
11
12
13
14
15
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement