You are here:
Forums
Pickups
Chevrolet Silverado & GMC Sierra
Chevy Silverado and GMC Sierra Electrical and Computer Questions

354 messages, Last post on Nov 20, 2009 at 11:13 AM
You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram
|
Replying to: brenlee (Dec 30, 2007 8:34 am) |
|
|
|
|
Replying to: arkpaul (Dec 04, 2007 6:27 pm) I tried a bypass module, but when I called the manufacture for DIY help they told me their product is not a solution to get around the engine immobilization, i.e. fuel pump shuts down. They said mom & pop alarm shops usualy have a "creative" way around this problem, but I can't find anyone locally that knows how to jump around the system to this problem so it goes away for good. Thanks! Help from anyone else would be greatly appreciated too.
|
|
|
Replying to: jeh4 (Jan 02, 2008 1:58 pm) |
|
My 2001 Chevy 2500 HD 6.0 liter is misfiring on #'s 2,4,6,8 cylinders and if I understood it correctly it is all on the passenger side. It just happened over night. It came up on the computer as being one of three things. Intake gasket, bad plugs or wires. Had the gasket replaced and drove it home about 7 miles and it ran fine. Sat for two days started it up and it was misfiring again with the service engine light flashing as before. I do have a bad catalytic converter that has been rattling for about 4 months, I don't know if that has any bearing on the problem or not. Thanks for any help.
|
|
|
Replying to: 98redrider (Sep 21, 2009 4:23 am) |
|
2007 Siverado 1500HD battery dies when truck is not used for more than 3-4 days, I have had the dealer do many tests and no real answers, the battery has been changed out twice, the truck is optioned up pretty good, so there are a lot of draw functions on it, but the parasitic draws are not out of line according to the dealer, I would like to use a bigger better battery, but the space won't allow this....any one had this problem???, the truck is well maintained, and had about 21K on it
|
|
|
|
|
Replying to: levin1 (Sep 21, 2009 7:51 am)
|
|
|
Replying to: greywrench (Sep 22, 2009 7:25 pm) |
|
|
Replying to: carnut69 (Sep 22, 2009 9:39 am) |
|
|
Service Engine Light with Code 440 emission fault, can not seem to find the problem. Have checked the wires and plugs, gas cap,etc. The canister is ok, but not sure how to check the purge solenoid? Anyone who has had this problem or idea I can use! With the code cleared you can start and drive maybe three times before the service engine light comes back on.
|
|
You are here:
Forums
Pickups
Chevrolet Silverado & GMC Sierra
Chevy Silverado and GMC Sierra Electrical and Computer Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Silverado 1500
2004 Chevrolet Silverado 2500
2006 Chevrolet Silverado 3500
2010 GMC Sierra 1500
2004 GMC Sierra 2500
2006 GMC Sierra 3500



Browse by Board
Browse by Topic
Today's Chats