You are here: Forums Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra Steering

Chevy Silverado and GMC Sierra Steering

139 messages,  Last post on Jul 15, 2009 at 11:19 PM

You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram

What is this discussion about? Chevrolet Silverado 1500, Chevrolet Silverado 2500, Chevrolet Silverado 3500, GMC Sierra 1500, GMC Sierra 2500, GMC Sierra 3500, Steering, Truck

#87 of 139 Vibration 50-58 MPH sounds like road bumps on highway by cstduramax Jul 03, 2008 (6:04 am)
I just recently installed a leveling kit on my 04 HD and since then I have developed a vibration sound that only happens between these speeds . It stops if you let of the throttle but it sounds like i am running over the ruts on the side of the freeway. has anyone had this problem or know how to fix it??
#88 of 139 Re: 2004 silverado [rodneyf] by rodneyf Jul 06, 2008 (6:03 pm)
Replying to: rodneyf (Jun 23, 2008 4:08 pm) I REPLACED THE FRONT DRIVERSIDE HUB ASSEMBLY AND MY PROBLEM WAS SOLVED. IT'S HARD TO BELIEVE ALL THAT LOUD WHINING COULD COME FROM THAT WHEEL HUB!! Replies to this message: knah2003 (Jul 07, 2008 6:03 am)
#89 of 139 Re: 2004 silverado [rodneyf] by knah2003 Jul 07, 2008 (6:03 am)
Replying to: rodneyf (Jul 06, 2008 6:03 pm) Was this out of your pocket or is there another GM "recall"....and how do we get this info to GM if there's not?
#90 of 139 Re: Utah Safety Newsletter. Please Read!! [openend22] by deade Aug 05, 2008 (5:18 pm)
Replying to: openend22 (Mar 10, 2008 2:24 pm) First, I live in Louisiana and have not heard of state inspections being rejected for this reason. Maybe this is something I can bring to the attention of LA-DOT.   I have a 2004 Z71 which I bought new and now it has only 28K miles. I noticed the clunking in the steering wheel at about 15k miles and was told it was not a major problem and that grease would help, but the clunking did not bother me enough to take it apart. Now, I have another problem with steering which is a safety hazard. At a stop and low speeds, with or without the breaks applied, I have no power steering assistance to the left. I jacked up the left side enough to get some pressure off the wheel and noticed I can steer in both directions just fine. I checked and greased both sides and did not find anything noticeably worn on the front end. I read a service bulletin that recommends changing the gear box from a 670 to a 680.   At the end of the day, I'm still scratching my head and looking for answers...All the help is greatly appreciated! Replies to this message: sjgbz (May 12, 2009 1:20 pm) obyone (May 12, 2009 2:04 pm) sjgbz (May 13, 2009 6:38 am) and 1 more...
#91 of 139 Re: 2004 silverado [rodneyf] by pathy58 Aug 06, 2008 (4:31 am)
Replying to: rodneyf (Jun 23, 2008 4:08 pm) I have an 04 4WD and had to have the rear slip yoke replaced because of a whinning noise. It was not there all the time but sometimes.
#92 of 139 Re: clunking intermediate steering shaft [obyone] by moortinez Aug 10, 2008 (12:54 pm)
Replying to: obyone (Nov 12, 2006 8:48 pm) I complained to the dealer my 03 felt as if the whole front end was going to fall out. They told me they knew what it was and fixed/lubed the Intermediate steering shaft, unfortunately in just a month it was the same thing. Who has the time to give up a vehicle for a few days every month to the dealer to keep repairing the same thing. Now I know why my friends by Tundras and GM is loosing money, they keep selling us junk. Replies to this message: obyone (Aug 10, 2008 3:13 pm) silverchevy (Sep 06, 2008 11:02 pm) davethecarnut (Sep 10, 2008 1:55 pm) knah2003 (Sep 11, 2008 6:54 am) davethecarnut (Sep 11, 2008 9:24 pm) silverchevy (Sep 12, 2008 12:33 am)
#93 of 139 Re: clunking intermediate steering shaft [moortinez] by obyone Aug 10, 2008 (3:13 pm)
Replying to: moortinez (Aug 10, 2008 12:54 pm) Things have changed since 2006. In 2007 GM came out with a replacement shaft part no. 19153614. FYI
#94 of 139 Re: clunking intermediate steering shaft [moortinez] by silverchevy Sep 06, 2008 (11:02 pm)
Replying to: moortinez (Aug 10, 2008 12:54 pm) I know how you feel about the int. steering shaft problem... I have a 2003 2500HD that I bought new in June, 2003. Of all the hundreds of parts that could have been junk on your truck, give GM,(Chevy) some credit, every other thing on my Silverado is still working from day one even every light bulb is original. I LOVE MY SILVERADO !!!  Look into buying an aftermarket shaft, they do make one. Good Luck, bp. Replies to this message: davethecarnut (Sep 10, 2008 1:55 pm) knah2003 (Sep 11, 2008 6:54 am) davethecarnut (Sep 11, 2008 9:24 pm) silverchevy (Sep 12, 2008 12:33 am)
#95 of 139 Re: clunking intermediate steering shaft [silverchevy] by davethecarnut Sep 10, 2008 (1:55 pm)
Replying to: silverchevy (Sep 06, 2008 11:02 pm) Did you buy an aftermarket part? I just got a message from my dealer that GM came out with a replacement part that should still be covered under warranty ( I have an 03 GMC) yes, a real part and not another lube kit. I'll let you know how it goes.
#96 of 139 psssst! by obyone Sep 10, 2008 (7:13 pm)
GM part no. 19153614   for the updated replacement intermediate steering shaft. Replies to this message: davethecarnut (Sep 11, 2008 9:20 pm)

You are here: Forums Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra Steering