You are here:
Forums
SUVs
Isuzu Rodeo
Isuzu Rodeo Maintenance and Repair

118 messages, Last post on Oct 06, 2009 at 2:06 AM
You are in the Isuzu Rodeo Forum. Your Hosts are steve_ & tidester
|
Replying to: brianrichardsm (Dec 01, 2007 11:39 am) Have a 14 mm socket on a 1/2 drive ratchet ready. I drew a diagram of the way the belt routes and it's saved the each time I've had it off to either replace or do other maint. You will need to pry the tensioner downward (the idler pulley side) and then you can remove the old one and replace it. It's got a good bit of tension, that's why I've found a 1/2 drive ratchet makes it a bit easier. Mark |
|
have been told will need a motor for rodeo ls. where can i find one? have knocking noise loudly in left side of motor now.
|
|
|
|
| Can you remove the valve covers on a Rodeo with the 3.2 with the intake still on? | |
|
Replying to: vicg (Jan 24, 2007 1:55 pm) Thanks |
|
|
Replying to: sdanner (Feb 26, 2008 11:22 am) |
|
|
|
|
|
|
| Hi, Everyone. My 2001 Rodeo has a burntout brake light on the left side and I can't figure out how to get at the bulb. Of course, the owner's manual doesn't bother to tell you how to do it. Do any of you have any experience with this? | |
|
|
| Can anyone tell me what sensor or sensors to replace for these codes? All I get from the computer are these codes that the left and right bank (cylinder sides) are running lean, but no remedy is stated.. can anyone help? | |
|
|
|
removed the fuses and it is still draining the battery. mechs are out of ideas. please help
|
|
You are here:
Forums
SUVs
Isuzu Rodeo
Isuzu Rodeo Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2004 Isuzu Rodeo



Browse by Board
Browse by Topic
Today's Chats