You are here: Forums Pickups Ford Ranger Ford Ranger Transmission Questions

Ford Ranger Transmission Questions

215 messages,  Last post on Nov 08, 2009 at 11:25 AM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck

Messages Page 10 of 22 1 ... 7 8 9 10 11 12 13 ... 22 Prev Next Last

Go To Msg # Search This Discussion

#88 of 215 Re: 03 ranger clutch noise [hiccup] by tfreeman2 Apr 19, 2008 (11:46 am)
Replying to: hiccup (Apr 06, 2008 2:15 pm) Same thing happening in my 99 Ranger 4x4. Annoying noise but EXACTLY the same. In first only when I am not concentrating on the noise it happens, if I release slow , or fast no noise. Who knows what is happening, please?? Any fixes yet, two mechanics say it is just and annoying noise that Ford makes, but others say maybe a noisy Slave cylinder. \Help???
#89 of 215 Re: 03 ranger clutch noise [hiccup] by tfreeman2 Apr 19, 2008 (11:48 am)
Replying to: hiccup (Apr 06, 2008 2:15 pm) Did you fix the noise yet?? my email is todd_freeman.bcflightcentre.ca , we should chat about this , if you have fixed it let me know please.   Todd Replies to this message: locoatrax (Apr 19, 2008 5:39 pm)
#90 of 215 Re: 03 ranger clutch noise [hiccup] by tfreeman2 Apr 19, 2008 (11:45 am)
Replying to: hiccup (Apr 06, 2008 2:15 pm) Same thing happening in my 99 Ranger 4x4. Annoying noise but EXACTLY the same. In first only when I am not concentrating on the noise it happens, if I release slow , or fast no noise. Who knows what is happening, please?? Any fixes yet, two mechanics say it is just and annoying noise that Ford makes, but others say maybe a noisy Slave cylinder. \Help???
#91 of 215 Re: 03 ranger clutch noise [tfreeman2] by locoatrax Apr 19, 2008 (5:39 pm)
Replying to: tfreeman2 (Apr 19, 2008 11:48 am) It wasn't the fuse?
#92 of 215 2003 Ranger xlt 4 cyl: 5 speed tranny removal by 2053 Apr 30, 2008 (3:19 am)
I am in the process of replacing the clutch on my 2003 Ford Ranger. It is a 2 wheel drive (4 cylinder with a 5 speed transmission). I have removed 8 bolts (13mm hex head bolts x 2 1/2" long) from around the transmission housing bottom and sides and can feel one more in a very akward position high on the right side (passenger side) of the housing (positioned near the front O2 sensor). The Haynes manual that I own does not indicate how many bolts there are in total nor does it show a picture of their locations. It appears to be very difficult if not impossible to access if there are any bolts located along the top of the housing. Questions: 1. How many bolts (13 mm head x 2 1/2") are there in total? So far, I have removed 8 and have found 1 more as noted above. 2. Are there any (13 mm head x 2 1/2") along the top portion of the tranny to engine? 3. If there are, how do you access? 4. Other than the dowel pins, are there any other bolts or nuts that must be removed along the tranny to engine that must be removed? 5. I searched the web for pictures of the bolt locations. Can anyone direct me to a site or manual that shows this. 6. The manual also references removal of the speedometer cable. I do not see this. Where is this located?
#93 of 215 92 Ranger 5 spd transmission??? by uneasy May 22, 2008 (11:14 am)
Can I put a transmission from an 88 ranger 5 spd into my 92 ranger
#94 of 215 1999 Ranger Transmission by vica May 30, 2008 (12:20 pm)
I have a 1999 ranger.....3.0, 4 wheel drive. When it shifts from 2nd to 3rd it will go right back into second and stay there. I have had the computer looked at and the transmission apart and looked at with no results. I also had the valve body changed and it is still doing the same thing. Any help would be great. Thanks Replies to this message: fordfan_17 (May 30, 2008 12:51 pm) vica (May 30, 2008 1:13 pm) fordfan_17 (May 30, 2008 1:49 pm)
#95 of 215 Re: 1999 Ranger Transmission [vica] by fordfan_17 May 30, 2008 (12:51 pm)
Replying to: vica (May 30, 2008 12:20 pm) you stated you had the vb changed did you put a used vb on it or did you get a reconditioned vb ? these unit have a severe problem with the vb and usually it wont go away unless you buy a vb that has had all the new valves put in it Replies to this message: vica (May 30, 2008 1:13 pm) fordfan_17 (May 30, 2008 1:49 pm)
#96 of 215 Re: 1999 Ranger Transmission [fordfan_17] by vica May 30, 2008 (1:13 pm)
Replying to: fordfan_17 (May 30, 2008 12:51 pm) It was a used vb..... Replies to this message: fordfan_17 (May 30, 2008 1:49 pm)
#97 of 215 Re: 1999 Ranger Transmission [vica] by fordfan_17 May 30, 2008 (1:49 pm)
Replying to: vica (May 30, 2008 1:13 pm) ok so are you getting any codes ie p0733 gear ratio error in 3rd and p0735 gear ratio error in 5th? if your answer is yes then you will need to replace the vb with a recon valve body assembly. its the only way to get rid of this problem. hopefully you havent damaged anything in the unit yet.

Messages Page 10 of 22 1 ... 7 8 9 10 11 12 13 ... 22 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Ford Ranger Ford Ranger Transmission Questions