- #80 of 215
-
Re: 03 ranger clutch noise [hiccup]
by sasha2
-
Apr 07, 2008 (3:40 pm)
-
|
|
Replying to: hiccup (Apr 06, 2008 2:15 pm)
Sounds like my 08 ranger after reading my manual I found I was shifting at over the recommened shift speeds so now I shift at the speeds in the ford manual and I do not get that feel in the clutch pedal ,I must have been over reving and shifting at a higher speed.Istill at times get that squeak in the pedal must be a ranger thing.Will at some point take it in for warranty check.
|
- #81 of 215
-
Re: Transmission selector not matching up [chapinjohn]
by cwbyjnky
-
Apr 09, 2008 (6:56 pm)
-
|
|
Replying to: chapinjohn (Apr 06, 2008 4:51 pm)
Thanks for your help I will look at it this weekend.
|
- #82 of 215
-
Transmission Gear Selector Cable
by logan65
-
Apr 10, 2008 (6:10 am)
-
|
i am doing a transmission swap in a 95 ford ranger and cannot figure out how to
remove the gear selector cable from the transmission.
can someone please advise me how to remove it or is there a special
tool required to do the job.
|
- #83 of 215
-
Slave Cylinder Cable Removal
by logan65
-
Apr 10, 2008 (7:16 am)
-
|
Can someone please tell me how to remove the "Slave Cylinder Cable" from
a 1993 Ford Ranger 5 speed manual transmission.
I am doing a tranny swap and I have removed the old transmission but it is
hanging from the truck by this cable.
|
- #84 of 215
-
2004 xlt 4+4 5speed
by locoatrax
-
Apr 12, 2008 (4:45 am)
-
|
|
when in 4 wheel drive My truck feels like it jumps every block or so. sounds like its coming from rearend . 2 wheel drive it works fine , should I trade it in ?
|
- #85 of 215
-
Re: 99 Ranger XLT 4X4 [99ranger4x4]
by iridium3
-
Apr 13, 2008 (10:28 am)
-
|
|
Replying to: 99ranger4x4 (Apr 03, 2008 1:12 pm)
Had an 89 Bronco II (same chassis as a Ranger) that did the same thing. Turned out to be a partially clogged catalytic converter. Replacing the exhaust system solved the problem. 
|
- #86 of 215
-
Re: 99 Ranger XLT 4X4 [iridium3]
by locoatrax
-
Apr 14, 2008 (5:33 am)
-
|
|
Replying to: iridium3 (Apr 13, 2008 10:28 am)
the next day it stoped should I still worry, how do I check the catalytic converter?
|
- #87 of 215
-
Re: 99 Ranger XLT 4X4 [99ranger4x4]
by mickeymac
-
Apr 18, 2008 (2:22 pm)
-
|
|
Replying to: 99ranger4x4 (Apr 03, 2008 1:12 pm)
I have a 99 ford ranger in my shop with this problem I fix it today. It was a blow fuse check fuse #13 this a 15 amp fuse under hood this go to trans and O2 sensers. Check the wiring on O2 sensers on driver side .This was on the exhaust and short the fuse out hope this help
|
- #88 of 215
-
Re: 03 ranger clutch noise [hiccup]
by tfreeman2
-
Apr 19, 2008 (11:46 am)
-
|
|
Replying to: hiccup (Apr 06, 2008 2:15 pm)
Same thing happening in my 99 Ranger 4x4. Annoying noise but EXACTLY the same. In first only when I am not concentrating on the noise it happens, if I release slow , or fast no noise. Who knows what is happening, please?? Any fixes yet, two mechanics say it is just and annoying noise that Ford makes, but others say maybe a noisy Slave cylinder.
\Help???
|
- #89 of 215
-
Re: 03 ranger clutch noise [hiccup]
by tfreeman2
-
Apr 19, 2008 (11:48 am)
-
|
|
Replying to: hiccup (Apr 06, 2008 2:15 pm)
Did you fix the noise yet?? my email is todd_freeman.bc flightcentre.ca , we should chat about this , if you have fixed it let me know please.
Todd
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups 
