Sign In Join 



Ford Ranger Transmission Questions

215 messages,  Last post on Nov 08, 2009 at 11:25 AM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck


Messages Page 8 of 22
1
...
5
6
7
8
9
10
11
...
22
Prev
Next
Last
Go To Msg #
Search This Discussion

#67 of 215
2000 Ranger V6 (small 6) manual trans by dejohn6
Dec 13, 2007 (10:06 am)
Reply
Would like some info to see if its the transmission or the clutch that is sadly not working properly.
Gears are hard to shift into unless clutch is to the floor. Want to go to shop with some info on hand as its a cruel world out there. Gears do shift smoother after warming up for a while. Thanks
#68 of 215
Trans problem by ohclemans
Dec 15, 2007 (7:14 pm)
Reply
I just bought a 02 Ranger edge 4x4 Auto. Has 53,000 mile. I noticed at speeds at or about 60-65 the trans seems to down shift kinda hard. Almost has a clunk sound,is this a common issue?What could be the cause?
#69 of 215
my truck makes a weird clunking noise from the tranny by rangerman251
Jan 08, 2008 (2:17 pm)
Reply
i bought a new 2007 ranger FX4 level 2 in june. late in november i started to hear a clunking noise or a thud coming from under the truck every few min's as i was driving up a hill here in town . i took the truck back to the dealer and they replaced my transfer case saying it was faultly. it still never fixed the noise problem. so i took the truck back to ford again and this time i went with the mechanic on a road test and we both heard the thud noise twice . he said theat there's nothing he could do and that it was some sort of re-bound noise of the drive shafts when one wheel spins a bit faster than the other because of the road conditions of winter with snow and ice regulary on the road up here in the north. but i dont belive him because i've never heard of a truck make that kind of a nose if everything is supose to be fine . any thoughts of what it could be ? and the soulition
 
I'd like to add the truck only has 9000km on it and i only hear the noise when the truck is in 4x4HI going about 60-80 km .
im just sick of hearing that sound
#70 of 215
Trans problem by ohclemans
Jan 08, 2008 (9:06 pm)
Reply
Update my 02 Ranger only seems to have the clunking sound when I go into 4x4 back into 2 wheel drive. It has a clunking sound and seems as if it is shifting down hard,then it goes completely away after about 20 mile's.
#71 of 215
brand new clutch installed causing bad noise by chrisjaaay
Jan 15, 2008 (6:14 pm)
Reply
I have a 2003 4x4 ranger with the 4.0 litre engine and I had a new clutch put in about a week ago. The minute I started my engine after it was put in I noticed a grinding or spinning noise coming from right below my shifter. I thought it might be the new parts breaking in so I tried to ignore it for a few days but the noise persisted. When I consulted my mechanic about it, he drove my truck and told me that it was a normal thing for rangers after time to aquire that noise and that there was nothing he could do about it. This noise does not seem normal to me at all. It drives me nuts. Has anyone had this problem with a ranger ever? I can hear it through all 5 gears. Please help
#72 of 215
Ranger differential by lau123
Jan 16, 2008 (3:20 pm)
Reply
I know this is probably the wrong spot for this question, but not sure where else to post. How do I know if the '04 used 2WD Ranger I am considereing buying has the limited slip differential? The salesman said he could tell by the axle code of F6 on the tag on the door. I asked two different service people and they said you could not tell that way. You had to crawl uner the vehicle and look at the differential for a tag the would say LSD with a number. 3.73? Any one know? Thanks
#73 of 215
Re: Ranger differential [lau123] by bolivar
Jan 16, 2008 (4:53 pm)
Reply

Replying to: lau123 (Jan 16, 2008 3:20 pm)

Here's something I found.
 
Google is your friend.
 
http://answers.yahoo.com/question/index?qid=20071220131031AApxoKR
 
Looks like F6 is Ranger Limited Slip.
#74 of 215
Ranger limited slip by lau123
Jan 17, 2008 (4:30 pm)
Reply
Thanks for the code definitions. My ranger does have it. Thanks again.
#75 of 215
2008 ranger clutch by sasha2
Feb 25, 2008 (4:04 pm)
Reply
I have a new ranger 2.3 manual with 7000 miles on it,when I shift gears and push the clutch in and release it, right before I take my foot off the clutch I can feel in the pedal the clutch make contact with the flywheel is this normal for the 2008 my 2005 I did not notice this. I might have to take it in to the dealer.Anyone else notice this?
#76 of 215
99 Ranger XLT 4X4 by 99ranger4x4
Apr 03, 2008 (1:12 pm)
Reply
i have a 99 ranger and when i put it into drive it seems like it wants to stall and i wont let me gas it up to get it moveing. it will roll and eventually get up to 50 or what ever speed but on start offs it doesnt wanna move it almost feels like its going to stall. and when i put it in to reverse it like slams into it and wants to go. has anyone had this problem? i have it at a local shop and they are stumped.

Messages Page 8 of 22
1
...
5
6
7
8
9
10
11
...
22
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics
Advertisement