You are here: Forums Pickups Ford Ranger Ford Ranger Transmission Questions

Ford Ranger Transmission Questions

215 messages,  Last post on Nov 08, 2009 at 11:25 AM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck

Messages Page 2 of 22 1 2 3 4 5 6 7 ... 22 Prev Next Last

Go To Msg # Search This Discussion

#5 of 215 Re: 93 ford ranger white smoke on start ups/ loss of trany fluid [bolivar] by adrian5366 Nov 18, 2006 (9:23 am)
Replying to: bolivar (Nov 14, 2006 8:14 pm) I cant get to it . Thats why I wanted to see is I could plug it with no ill effects. Replies to this message: bolivar (Nov 19, 2006 1:45 am)
#6 of 215 Re: 93 ford ranger white smoke on start ups/ loss of trany fluid [adrian5366] by bolivar Nov 19, 2006 (1:45 am)
Replying to: adrian5366 (Nov 18, 2006 9:23 am) The vacumn modulator valve is an intergral part of making the transmission shift, especially shift smoothly.   On my 4Liter Ranger, it was right above the cat converter, I think. It is tough to see, but these are usually held on with one bolt, so you should be able to get a socket on it. It really shouldn't be that difficult to remove.
#7 of 215 Clunking noise coming from rear of truck by scott70 Dec 06, 2006 (4:45 pm)
I have a 2003 Ranger and there's a clunking noise coming from the rear of the truck when I'm in 4x4. We got the truck up in the air and the sound only occured when the truck was in gear and the wheels were moving and I also had my foot on the brake. It seems to be coming from the rear transfer case or some sort of harmonic balancer in the back. Anybody got any thoughts on what it could be? Drivetrain...
#8 of 215 Trans/Ranger/01 by autom80 Jan 04, 2007 (12:27 pm)
Anyone know how to drain trans fluid? I see no drain plug. Replies to this message: bolivar (Jan 04, 2007 2:34 pm)
#9 of 215 Re: Trans/Ranger/01 [autom80] by bolivar Jan 04, 2007 (2:34 pm)
Replying to: autom80 (Jan 04, 2007 12:27 pm) Remove the pan.   Have a BIG catch container. When the last bolts come loose, and the pan drops down, the fluid will start coming out all around the pan.   Very messy.
#10 of 215 94 ranger trans by rrshannon Jan 21, 2007 (5:06 pm)
i have a 94 ranger the trans is slipping pretty bad. i was wondering if i could put a aod trans out of a 89 mustang in it. if anyone knows please let me know
#11 of 215 2000 ranger 4x4 transmission slipping by buckhunter Jan 24, 2007 (7:08 am)
Hello, I'm new to this forum and this problem! My ranger is starting to slip between 2nd & 3rd gears, it has 61,000 easy miles on it. the local transmission shop said it's a common problem for ford's 4.0 (5r55e transmission) there is a service kit (ZM-203)and a new valvebody separator plate (7Z490) that needs to be replaced. Does anyone know where I can get this kit and how hard is it to do myself, they wanted $1750.00 and the print-out they gave me showed 2.2 hours labor, I work maintence in a factory so I have very good mechanical skill's, Thank you in advance.
#12 of 215 ford ranger transfer case by pitcher Jan 24, 2007 (3:08 pm)
does anybody know how to get a 1994 ford ranger pu 4x4 out of 4wheel drive? I think it's the little drive motor on the transfer case as I tested the button to the computer. Is there a manual way to get it out of 4wheel?
#13 of 215 Ranger auto trans fluid by rangerdude7 Jan 26, 2007 (7:24 pm)
I am thinking of changing ato trans fluid (Mircon V) in 2002 Ranger What brand names are good to use? Any do's or dont's or should or should not. Wal Mart fluid OK?    Thanks Rangerdude7
#14 of 215 83 ford ranger 4x4 by lorrie2 Jan 27, 2007 (8:44 am)
DOES ANYONE KNOW WHY. MY MANUAL 5 SPEED. IS STUCK IN SECOND GEAR.

Messages Page 2 of 22 1 2 3 4 5 6 7 ... 22 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Ford Ranger Ford Ranger Transmission Questions