You have saved this page | See all saved pages
Ford Ranger Transmission Questions
292 messages, Last post on Jan 09, 2013 at 11:03 PM
You are in the Ford Ranger Forum.- Your Host is kcram
What is this discussion about? Ford Ranger, Truck
#277 of 292 Re: 1993 3.0 5 speed [sam213] by mock2
Dec 21, 2011 (4:41 am)
Replying to: sam213 (Dec 15, 2011 3:43 pm)
did you lube it or change it?
- sam213 (Jan 03, 2012 4:15 pm)
Replies to this message:
#278 of 292 2000 Ford Ranger transmission problem by nuttynan
Dec 31, 2011 (10:02 am)
I have a 2000 Ford Ranger 4x4 5 speedWhen locking in 4 wheel the transmission is slipping is there an adjustment you can make on the sprocket chain on the transmission (transfer case) ???
#279 of 292 Re: 1993 3.0 5 speed [mock2] by sam213
Jan 03, 2012 (4:15 pm)
Replying to: mock2 (Dec 21, 2011 4:41 am)
it turned out to be my tps. soon as i changed that everything worked out
#280 of 292 Hard Shifting by sivicman
Jan 10, 2012 (2:30 pm)
I have a 2010 Ranger 2WD with a manual transmission and it seems to be getting harder to get into gear (1st & 2nd) so I took it into the dealer and the transmission mechanic test drove it and agreed that it seemed like the synchronizer was hanging up. He said it would be covered under warranty since I only have 16K on it. He asked me to wait until it gets worse so he could easily identify the bad parts. I just wondered if anyone else has had this problem with their Ranger?#282 of 292 99' Ford Ranger 4.0V6, Auto Need Help I have no reverse in my truck. by 99ranger99
Jan 17, 2012 (4:04 pm)
This morning, I put the truck in reverse it went fine in gear, I drove in reverse maybe 20' and it felt like I had hit something. The truck shook, I didn't really hear anything. I got out and didn't see anything, but the truck wouldn't go into reverse. I toggled thru fwd then reverse a few times and it went into reverse. I drove a few miles to the store and the same thing. Now I am home and no reverse. Then fluid level is fine but smells burnt.I have a 2nd interview tomorrow, all indications are that I will finally be hired after 4 years unemployed now this luck. The job is 50 miles away and the only way there is through the Cajon summit(moderate elevation mtn. pass) I have read stories of being able to drive forward even though there is no reverse gear. I can deal with this of course. I am just afraid of the whole tranny going out completely.
I have never had a problem other than hard shifts from 1st to 2nd since I got my ranger with 86k mi.
#283 of 292 89 ford ranger auto trans v6 by richarddmsr
Feb 22, 2012 (1:18 pm)
my trans just quit well go into gears but have noting was just driveing and it just stoped working i ck fuild it is clean no burn smell shifter gose in all gears but well not in gage#285 of 292 Ranger transmission? by tcouncilman
May 27, 2012 (8:11 am)
I believe it's my transmission not sure but I'm leaking fluid and when I looked it looks like I have some bolts missing. I have a picture but I don't see where to attach it here. I had service done on it about 10000 miles ago. Did they not put the bolts back on tight enough and they fell off?#286 of 292 Transmission slip HELP!! by v6ranger2
Jul 07, 2012 (10:16 pm)
Okay, i have a 2001 3.0 v6 automatic 2wd lifted on 33s and my transmission slips and bangs into drive and 1st gear i changed the transmission fluid and it still didnt help, its drive able but i do go mudding and im afraid im gonna throw my drive shaft or whole transmissionTo POST a message, please
Sign In.
Advertisement
Most Popular in Forums
Search Forums
Enter Keyword(s):
Learn More, Do More
Edmunds Community
Advertisement