Last post on Jan 09, 2013 at 11:03 PM
You are in the Ford Ranger
What is this discussion about?
Ford Ranger, Truck
#257 of 292 Re: WHY MY CLUTCH IS NOT BUILDING PRESSURE [altonsmith]
Sep 09, 2010 (11:43 am)
Iam having the same problem with my 2000,2WD,5Sd, Ford Ranger. My problem started when I was pushing in the clutch and heard a pop, line going from master cylinder to slave cylinder busted, fixed the line and then tried to bleed it. The tips I got for bleeding did not help any, some of replys said that the Ford Ranger is a real pain in the but to bleed and that it needs a pressure pump or vacuum bleeder to bleed it correctly. I don't know if this is true but it would nice to fine out from someone that knows. Also there was one more reply that I got to the reason of why there is no pressure build up in my clutch, and that is the slave cylinder might be gone and that it will have to be replaced. I looked in to replacing the slave cylinder and I can tell you from the sounds of it, this can be costly to replace. The part it self is not much $85.00, its the taking out and puting in the new one that will get you, 1, the transmission has to be taken down because the slave cylinder is in side of the bell housing and if you were to do it ur self, then there goes a couple of days and that if noting goes wroung.
#258 of 292 1995 ranger 4x4
Dec 02, 2010 (12:27 am)
I have a 1995 ford ranger when i am in 4wd low drives fine when i shift to 4wd high or 2wd the transmission will making a grinding sound and not go into reverse go back to 4wd low all works fine anybody ever run into this problem or have a ideal on what to do
#259 of 292 !994 Ford Ranger, automatic
Jan 02, 2011 (2:02 pm)
1994 Ford Ranger. Forward gears don't work. I rev the engine til 1st gear kicks in, then it shifts normal. When I stop the truck, I have to repeat the process. Can you tell me what's wrong and how to fix it. Reverse works all the time.
#260 of 292 2000 Ranger Will Not Back Up
Feb 20, 2011 (6:17 pm)
2000 Ranger 4X4. WIll not back up but drives forward fine. I can rev the engine and the truck rocks backward slightly. Any ideas what it could be? The fluid is full and is not burnt.
#261 of 292 Re: 86 automatic ranger reverse issues [bnmfarms]
Mar 09, 2011 (8:03 pm)
Did anyone ever answer you problem. I have a 99 Ford Ranger that has the same problem. Reverse works fine when cold but after 30 minutes of driving it takes about 5 to 8 seconds to go into reverse and then it is a little jumpy unless you accelirate. Any direction would be helpful.
#262 of 292 1989 automatic transmission
Jun 07, 2011 (3:38 pm)
have had the transmission rebuilt but the mechanic says it is shifting thru the gears too fast anyone ever have this problem and how did you fix it
#263 of 292 1993 automatic transmission
Jun 13, 2011 (5:06 pm)
car shuts off when i put it in drive or reverse .starts in neutral or park but soon as put it drive it shuts off.any ideas.
#264 of 292 Re: 99 Ranger O/D Flashing [IhateFords007]
Jul 07, 2011 (8:58 pm)
I have a 2002 ranger with same trans problem. It was diagnosed with a PO735 code. I plan on going to several trans shops to get it scoped. Hopefully I can find a trans guy that is knowledgeable about ranger trans.
#265 of 292 94 ranger transmission problem?
Aug 30, 2011 (10:58 am)
i have a 94 ford ranger 3.0 v6 5 speed. the problem originally just started in 5th gear with a small vibration and then 5th gear got even worse and vibrated really bad when accelerating although there is no slip or shortage of power. and now its starting to do it in every gear and is quickly getting worse.....does anyone know if its a clutch or a transmission problem? and if it is a transmission what will it cost to replace it?
#266 of 292 97 ranger 4x4 5 speed manual trans noise
Nov 27, 2011 (6:44 pm)
truck drives good sometimes not at regular intervals it gets this loud noise.form under the shifter.
can happen in all gears. sometimes seams to be triggered by turns or bumpy roads.can be felt as a slight shaking almost like e brake is on Sounds like a train with the brakes locked.
any suggestions? checked brakes and u-joints...thats not it.