Ask the Car People.SM


Ford Ranger Transmission Questions

292 messages,  Last post on Jan 09, 2013 at 11:03 PM

You are in the Ford Ranger Forum.

What is this discussion about? Ford Ranger, Truck

Messages Page 26 of 30

#247 of 292 abs light and shifting hard, spedometer by coldmama

Jun 26, 2010 (9:58 pm)

i have a 99 ford ranger. had no problems. my abs light on my dash came on and my speedometer went from 0-15-0 again while traveling. started shifting hard. flushed trani fluid and checked front wheels , no wobbling, no problems with barrings or brakes. can anyone help. ?????????

#248 of 292 trans trouble by alfredr

Jul 25, 2010 (3:39 pm)

my oil seal blew out ,is my trans blown or need a new seal and coverter

#249 of 292 1992 3.0 3 SPEED AUTO WITH OVERDRIVE RANGER TRANS by alfredr

Jul 27, 2010 (4:35 am)

MY FRONT SEAL BLEW OUT,DO I NEED TO REPLACE THE CONVERTER AND TRANS OR JUST THE SEAL

#250 of 292 tranny frustration----07 Ranger by 2007ranger

Aug 02, 2010 (10:13 pm)

Have a 2007 Ranger XLT V-6 4.0 5 speed auto. Having occassional clunk noise from tranny or drive line (like a bad u-joint) after turning a corner and accelerating. Same thing on highway when I de-accelerate then accelerate but not all the time. Ford shop says everything looks fine and can find no problem. Last time service "expert" says thats the way its designed to eliminate excess torque between drive line and tranny so the clutch doesn't have excess wear. Have 46500 miles and tranny flush at 45000. They said fluid was "slightly" burnt and failed to save me a sample that I requested. Any ideas???

#251 of 292 2000 ford ranger put in reverse herd a clunk then reverse quit working. by jshadow

Aug 26, 2010 (3:17 pm)

It still moves a little bit in reverse but it acts like it's in nutral, but drives and shifts fine in drive. Anyone know whats wrong? The cicker I had it sold to a guy and he was going to pay and pick up today, damn my luck.

#252 of 292 Eratic Shift's by dper299

Aug 29, 2010 (5:27 am)

#253 of 292 Eratic Shift's by dper299

Aug 29, 2010 (5:35 am)

I have a 99 ranger 3.0 flex 4x4 Reg cab with auto trans 87,000 miles. Problem is that at times when it shift's from 1st to 2nd it feels like it's sliding into second and you have to wait on it, then it's a rough shift into third,and other times it shift's thru all gears nice and smooth (thus Eratic ) this was happening prior to fluid change. Put new fluid in along with a bottle of Seafoam and nothing has changed. I am wondering if this the driveshaft (which has also been taken apart and greased ) or is it that the bands need adjusting...Any ideas would help...Thanks

#254 of 292 1992 3.0 3SPEED AUTO WITH OVERDRIVE by alfredr

Aug 29, 2010 (6:27 am)

MY SEAL POPED OUT,AND ALL THE FLUID LEAKED OUT,IS THE TRANS BLOWN OR JUST THE SEAL. PLEASE LET ME KNOW.

#255 of 292 86 automatic ranger reverse issues by bnmfarms

Aug 30, 2010 (5:28 am)

im having a problem with my 86 2wd ranger with reverse not working after i drive it 30 or so miles but i let it sit for 10mins and works fine again any ideas what could be causing this?

#256 of 292 what is wrong?? by aepine

Sep 03, 2010 (6:41 pm)

i have a 94 4.0l 4x4 every once and awhile the transmission will start to pull then kick out of gear. When i rev it then it will slam back into gear. Wondering what could be the problem. Checked the fluid it was ok.

Messages Page 26 of 30

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement