You are here: Forums Pickups Ford Ranger Ford Ranger Transmission Questions

Ford Ranger Transmission Questions

215 messages,  Last post on Nov 08, 2009 at 11:25 AM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck

Messages Page 21 of 22 1 ... 16 17 18 19 20 21 22 Prev Next Last

Go To Msg # Search This Discussion

#197 of 215 Re: ford ranger trans [kdeezle] by rcram Aug 14, 2009 (11:29 am)
Replying to: kdeezle (May 18, 2007 11:20 am) you should try to spray all the bolts and threads with penetrating oiland let it sit for a day periodically respraying with the oil it should loosen most of the bolts
#198 of 215 Re: Slave Cylinder Cable Removal [logan65] by rcram Aug 14, 2009 (2:32 pm)
Replying to: logan65 (Apr 10, 2008 7:16 am) it has a hydrolic clutch ? if so look at the tube at the quick connect you will see a white ring well get a medium sized screw driver and push the white ring in to the collet untill you cant see it any more and that will release the tube from the slave cylinder just push it in around the ring until it disapears and tug on the tube it should come out
#199 of 215 bad trany by irish_85 Aug 21, 2009 (2:58 pm)
i got a 96 ranger / standard and 1st & 2nd most of the time are not there and 1st gear will go way out of its normal positioning and touch the dash. what should i do to go about fixing this problem? i'm pretty sure the trany might be going out on me.
#200 of 215 Re: my 94 ranger [marked1] by irish_85 Aug 21, 2009 (3:22 pm)
Replying to: marked1 (May 17, 2009 12:37 pm) i got a 96 ranger / standard and 1st & 2nd most of the time are not there and 1st gear will go way out of its normal positioning and touch the dash. what should i do to go about fixing this problem? i'm pretty sure the trany might be going out on me.
#201 of 215 WHY MY CLUTCH IS NOT BUILDING PRESSURE by altonsmith Aug 26, 2009 (11:10 am)
I HAVE A 2000 FORD RANGER WITH MANUAL TRANSMISSION AND I'M HAVING A HARD TIME FIGURING OUT WHY THE CLUTCH IS NOT BUILDING PRESSURE
#202 of 215 Automatic Ford Ranger (downshift) question by jawtin Aug 26, 2009 (7:32 pm)
#203 of 215 Automatic Ford Ranger (downshift) question by jawtin Aug 26, 2009 (7:32 pm)
I'm shopping around for a used ranger, 2000-04. In a couple of them, when you're coming to a stop and it's down shifting, it is a little clunky. What is this? I found a nice one today, '00 with 54k, but it also has this clunky down shifting right before you come to a stop. Is this a bad thing?
#204 of 215 shifts but won't move by pat93 Aug 31, 2009 (5:50 pm)
I have a 95 Ranger that shifts into gear without a problem but won't move. Any ideas? Replies to this message: bemad1234 (Oct 21, 2009 6:06 am)
#205 of 215 shifting ok but won't move by 93teal Sep 02, 2009 (5:53 pm)
just got a 93" 4x4 5spd and it shifts but when I let out the clutch it dies?????? Droped the drive shaft to tow it home.
#206 of 215 09 RANGER by cwac1959 Sep 29, 2009 (5:15 pm)
I HAVE AN 09 FORD RANGER WITH A 5 SPEED TRANSMISSION. IT HAS 32000 KM ON IT 20,000 MI. I'M ON MY 3RD SLAVE CYLINDER. I'M WONDERING IF THERE IS A PROBLEM IN THE CLUTCH AND TRANSMISSION.THIS SLAVE CYLINDER HAS 2000 KM ON IT AND I'M ALREADY GETTING THE WHESING SOUND TELLING ME I HAVE TO TAKE IT BACK IN TO HAVE IT CHECKED.

Messages Page 21 of 22 1 ... 16 17 18 19 20 21 22 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Ford Ranger Ford Ranger Transmission Questions