Sign In Join 



Ford Ranger Transmission Questions

215 messages,  Last post on Nov 08, 2009 at 11:25 AM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck


Messages Page 18 of 22
1
...
15
16
17
18
19
20
21
22
Prev
Next
Last
Go To Msg #
Search This Discussion

#168 of 215
Re: No 4th Gear (Overdrive) [stevegintn] by stevegintn
Feb 14, 2009 (6:24 am)
Reply

Replying to: stevegintn (Jan 31, 2009 5:40 am)

One last update: After the transmission checked out fine, I replaced the ECM but made no diff - still no overdrive (4th gear) and cruise control does not work.
 
Anybody have a clue as to what's going on? - maybe a short somewhere?
 
I'm about ready to call it quits.
#169 of 215
Ford Rangwer 99 auto Transmission by efresso
Feb 16, 2009 (2:36 pm)
Reply
Reverse doesn't work. Want to know possible causes?
#170 of 215
99 Ranger O/D Flashing by IhateFords007
Feb 18, 2009 (9:27 am)
Reply
Okay, I have seen several different replies to this question, and they are all different. Hopefully, I can get a for sure answer?
 
I have a 99 Ranger 3.0 automatic. I have already replaced the transmission once in it. Now the Over Drive light flashes and the transmission slams between first and second, with the check engine light constantly on. Can someone please give me a for sure answer on this? I would really hate to replace the transmission again for nothing.
#171 of 215
my 94 ranger by jbo2300
Feb 18, 2009 (6:23 pm)
Reply
my ranger is making a noise like a dddddddd in 1st 2nd 3rd and 5th no noise in fourth though somebody please help me out it also whines in 1 2 3 5 not 4
#172 of 215
Swapping out the 5speed trans on my 08 Ranger 4x4 by doublej2
Feb 24, 2009 (9:25 am)
Reply
Anyone ever attempt or heard of anyone swaping out the 5 speed on a Ranger with a 6 speed? My current gas mileage is herrendous and I'm hoping to improve it.
Thanks.
#173 of 215
Re: Swapping out the 5speed trans on my 08 Ranger 4x4 [doublej2] by bolivar
Feb 24, 2009 (9:45 pm)
Reply

Replying to: doublej2 (Feb 24, 2009 9:25 am)

It's a truck.
 
It's a 4x4.
 
It's going to get bad milage.
#174 of 215
Re: Swapping out the 5speed trans on my 08 Ranger 4x4 [bolivar] by doublej2
Feb 25, 2009 (4:13 am)
Reply

Replying to: bolivar (Feb 24, 2009 9:45 pm)

Hey, thanks for the update! No, really!
#175 of 215
92 ford ranger 4th and 5th gear by jmehoff
Mar 19, 2009 (10:15 pm)
Reply
I just purchased a '92 for ranger, truck was great on test drive! and ran fine the first couple of hours after purchase. Now when i shift up into 4th gear or 5th/OD, it acts like there is no power coming from the engine. It doesn't seem to be slipping or grinding... Just no power, and if you put the peddle to the floor the whole truck shakes and acts like it wants to die. I know the truck was sitting for a few years prior to my purchase... Could this be related to the fuel pump or filter in any way? And to be honest the first 3 gears are fine, nice and smooth. Any information would be nice, i'd like to fix this problem myself.
#176 of 215
trans prob. by redneck8
Apr 17, 2009 (2:49 pm)
Reply
my question is will a 1988 tras. work on a 1994 both 5-speeds the only diff. is the last letter on the tag everything is the same
#177 of 215
Re: 92 ford ranger 4th and 5th gear [jmehoff] by cwhary914
Apr 19, 2009 (3:25 pm)
Reply

Replying to: jmehoff (Mar 19, 2009 10:15 pm)

from cwhary914; I have the same year ranger & went through the same problem. The first thing is check spark plugs make sure they are good & gaped right. Next check wires with timing light this will tell you if the wire is mis firing under load. Next check the cap for cracks {HAIR LINE].Next make sure the belt didn"t jump. Take out #1 spark plug and turn the motor by hand to top dead center,make sure cap is on the #1 firing, stick a screw driver down #1 cylinder and move the motor at the same time {If the screw driver comes up the belt jumped ahead -If the screw diver goes down the belt fell behind. If it doesn"t move at all the minute you move the motor it is on top dead center.next make sure the firing order is right.there are two types most are of a U seiries. the firing order is on the top of the engin near the intake. the U is the first letter of your seirial #. In my case I had done all tese thing and still had the problem I fixed my problem by going with a hotter plug,Do to the gas know has ethonal in it.PS. dump 2 cans of muti port fuel cleaner in your tank the gas lines can become corroded from sitting for some time. It takes A day or two of driving to clean them. On the 5 day take your plugs out & claen them agian. It sounds like A lot but It is not your tranny .

Messages Page 18 of 22
1
...
15
16
17
18
19
20
21
22
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement