- #127 of 215
-
2005 ranger..cold air
by mgunde
-
Oct 09, 2008 (4:27 pm)
-
|
|
Even with the fan off, there's always cold air coming out of the vents, whats up with this?
|
- #128 of 215
-
2000 ranger wont shift
by maria16
-
Oct 16, 2008 (3:45 pm)
-
|
|
Help! My 2000 ranger currently will not shift gears and the check engine and abs lights are on, and the o/d light flashes. Also, the speedometer doesnt work. Does anyone know why this is happening and what needs to be done to fix it? Ty!
|
- #129 of 215
-
Re: 2000 ranger wont shift [maria16]
by bolivar
-
Oct 17, 2008 (1:04 am)
-
|
|
Replying to: maria16 (Oct 16, 2008 3:45 pm)
I think this is a 'standard' problem for Rangers, but I'm not sure of the problem. It may be the ABS sensor that is in the rear differential has failed, and it causes all these problems. If this is it, it's not a terrible expensive repair. Remove the electrical connection, one bolt, pull out the old sensor, put a new one it.
|
- #130 of 215
-
Re: 2000 ranger wont shift [maria16]
by marco32110
-
Oct 22, 2008 (2:37 pm)
-
|
|
Replying to: maria16 (Oct 16, 2008 3:45 pm)
hello, i was wondering if you were able to figure out the problem with your truck? My ranger actually did the same thing to me today on the way to work! If you have already fixed it could you tell me what the problem was and to fix it? thanks!!
|
- #131 of 215
-
Re: 2000 ranger wont shift [marco32110]
by maria16
-
Oct 23, 2008 (10:13 am)
-
|
|
Replying to: marco32110 (Oct 22, 2008 2:37 pm)
yes I did get it fixed, it was the abs speed sensor and the part is only about $30. However with labor, I paid a little over $100. Hope this helps!
|
- #132 of 215
-
Re: 2000 ranger wont shift [maria16]
by bolivar
-
Oct 23, 2008 (8:04 pm)
-
|
|
Replying to: maria16 (Oct 23, 2008 10:13 am)
Ah, so I got one right....
|
- #133 of 215
-
by tgbrem
-
Nov 08, 2008 (7:28 pm)
-
|
|
we change a trannsmission in a 1992 ford ranger 3.0L 2wheel drive now truck wont start
|
- #134 of 215
-
Engine problem
by dysnai34
-
Nov 10, 2008 (12:30 pm)
-
|
|
I have a 2002 Ford Ranger and the engine is shot - was wondering if it was a good idea to put in a used engine with 41,000 on it for $1600 plus labor
|
- #135 of 215
-
Re: Engine problem [dysnai34]
by jre56
-
Nov 10, 2008 (3:49 pm)
-
|
|
Replying to: dysnai34 (Nov 10, 2008 12:30 pm)
There's a few factors you have to weigh.What condition is the used motor? What condition is the transmission in,is the body in good shape.Who's installing the motor(are they competent?).What kind of warranty are they offering?1600 + labor seems a little high for a motor + labor install.I had a motor installed in a 1995 Tracker and it costed me 1200, labor included with a 90 day warranty and it had 42,000 miles on the motor.Anytime you change a motor or a trans. you never know what you're getting until you drive it for a while.So good luck !
|
- #136 of 215
-
Ranger transmission
by locdoc88
-
Nov 13, 2008 (7:25 pm)
-
|
|
Is there a Ranger 5 speed that will bolt up to a '49 Ford F1 239 Flathead?
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups 
