Sign In Join 



Ford Ranger Transmission Questions

215 messages,  Last post on Nov 08, 2009 at 11:25 AM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Truck


Messages Page 14 of 23
1
...
11
12
13
14
15
16
17
...
23
Prev
Next
Last
Go To Msg #
Search This Discussion

#124 of 215
Re: Why is my O/D flashing on 2001 3.0 auto ranger [thatoneguy] by leeschmdt
Sep 27, 2008 (8:48 am)
Reply

Replying to: thatoneguy (Dec 19, 2006 7:38 pm)

just wondering if any one had an idea about this issue. i am having the same problem with the O/D not turning off. what was the fix to this problem. my vehicle is a 2000 3.0L automatic ford ranger
#125 of 215
Re: 1999 Ford Ranger - won't go into gear [nak_machinist] by cfowleron
Sep 30, 2008 (8:37 pm)
Reply

Replying to: nak_machinist (Sep 23, 2008 11:24 pm)

That's what I was afraid of. LOL Thanks for the advice I appreciate it. I was hoping against that.
#126 of 215
2005 ranger..clunk noise by mgunde
Oct 09, 2008 (4:25 pm)
Reply
When I start my truck in the morning or after work, there is a clunking thud sound that comes from the tranny area, it only happens when the truck is cold, its there only for the initial start up and goes away, its like something is being released any ideas on what this is?
#127 of 215
2005 ranger..cold air by mgunde
Oct 09, 2008 (4:27 pm)
Reply
Even with the fan off, there's always cold air coming out of the vents, whats up with this?
#128 of 215
2000 ranger wont shift by maria16
Oct 16, 2008 (3:45 pm)
Reply
Help! My 2000 ranger currently will not shift gears and the check engine and abs lights are on, and the o/d light flashes. Also, the speedometer doesnt work. Does anyone know why this is happening and what needs to be done to fix it? Ty!
#129 of 215
Re: 2000 ranger wont shift [maria16] by bolivar
Oct 17, 2008 (1:04 am)
Reply

Replying to: maria16 (Oct 16, 2008 3:45 pm)

I think this is a 'standard' problem for Rangers, but I'm not sure of the problem. It may be the ABS sensor that is in the rear differential has failed, and it causes all these problems. If this is it, it's not a terrible expensive repair. Remove the electrical connection, one bolt, pull out the old sensor, put a new one it.
#130 of 215
Re: 2000 ranger wont shift [maria16] by marco32110
Oct 22, 2008 (2:37 pm)
Reply

Replying to: maria16 (Oct 16, 2008 3:45 pm)

hello, i was wondering if you were able to figure out the problem with your truck? My ranger actually did the same thing to me today on the way to work! If you have already fixed it could you tell me what the problem was and to fix it? thanks!!
#131 of 215
Re: 2000 ranger wont shift [marco32110] by maria16
Oct 23, 2008 (10:13 am)
Reply

Replying to: marco32110 (Oct 22, 2008 2:37 pm)

yes I did get it fixed, it was the abs speed sensor and the part is only about $30. However with labor, I paid a little over $100. Hope this helps!
#132 of 215
Re: 2000 ranger wont shift [maria16] by bolivar
Oct 23, 2008 (8:04 pm)
Reply

Replying to: maria16 (Oct 23, 2008 10:13 am)

Ah, so I got one right....
#133 of 215
by tgbrem
Nov 08, 2008 (7:28 pm)
Reply
we change a trannsmission in a 1992 ford ranger 3.0L 2wheel drive now truck wont start

Messages Page 14 of 23
1
...
11
12
13
14
15
16
17
...
23
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement