Sign In Join 



Mitsubishi Montero Maintenance and Repair

233 messages,  Last post on Dec 04, 2009 at 6:48 PM

You are in the Mitsubishi Montero Forum. Your Hosts are steve_ & tidester

What is this discussion about? Mitsubishi Montero, Mitsubishi Montero Sport, SUV


Messages Page 16 of 24
1
...
13
14
15
16
17
18
19
...
24
Prev
Next
Last
Go To Msg #
Search This Discussion

#149 of 233
2001 Montero 2WD to 4WD Grinding noise and Clunk by rxr1
Jul 23, 2008 (4:08 am)
Reply
hi there, i have a 2001 LTD and when on 2WD, the vehicle is trying to shift automatically to 4WD and hear a grinding noise and then a thud/clunk, the vehicle is still in 2WD, but it is trying to shift to 4WD, when I run it on 4WD, absolutely no issues. Took it to a dealer and he says, about 1500, need to replace some relays /solenoids.
 
I am looking for some help for a DIY and some pointers..
 
Thanks
- Rxr
#150 of 233
1998 Montero Sport alternator by jdegraff
Aug 03, 2008 (6:19 am)
Reply
Alternator appears to be out. Is this a one belt vehicle or is there a separate belt for the alternator?
#151 of 233
Re: 1998 Montero Sport alternator [jdegraff] by ocmontero
Aug 03, 2008 (8:47 am)
Reply

Replying to: jdegraff (Aug 03, 2008 6:19 am)

This vehicles has multiple belts, so YES it has a separate belt for alternator. Good luck with that!
#152 of 233
new battery,radio code and still no idle by nyr2002nyr
Aug 28, 2008 (5:41 am)
Reply
2000 montero sport 3.0
 
Ok i had to change my battery and then i entered the radio code in but i still can not get my car to get a normal idle back any ideas???
#153 of 233
Re: I'm always running hot! [jschoenberger] by jschoenberger
Aug 28, 2008 (9:03 am)
Reply

Replying to: jschoenberger (Jul 06, 2008 8:53 am)

Just to let everyone who asked me....changing the circuit board did not get rid of the problem. It's in the shop again...I'll keep you posted.
#154 of 233
monero srs brake anti lock battery lights all on by berinhard
Aug 28, 2008 (8:01 pm)
Reply
First the battery and brake lights came on now the srs and anti lock lights on and my idel drop to zero and all my inter lights are dim what is it
#155 of 233
O2 Oxygen Sensor in 2002 Montero Sport 3.5 by johncage
Aug 28, 2008 (9:39 pm)
Reply
Hello,
 
Error codes indicate the sensor 1/bank 1 O2 sensor is causing my check
engine light to come on once the engine warms up on my Montero. It
appears that sensor is located on the drivers (left side) and I have a
couple of questions I'm hoping someone may be able to answer. First,
how do I determine if it's a California or Federal model sensor (and
if I erred on the replacement, would it matter)? - I don't live in
California...
 
Next, what's the easiest access to this sensor? It appears that
perhaps popping loose the mud flapping material may allow access
through the wheel well. Thought I'd look for someone with experience
before getting into this.
 
Finally, I'm somewhat inclined to purchase the OEM replacement and was
looking at the Bosch replacement from Autozone. They also sell a
'universal' Bosch that is supposed to work fine. Anyone have opinions
on this? Any help is greatly appreciated.
 
John
#156 of 233
1999 Montero stalls by angelarey
Sep 17, 2008 (7:27 pm)
Reply
I have a 1999 Montero. It needed a new battery. upon isntalling the new battery, it started stalling when you started, breaked or coasted. It idles at 800rpms then just abruptly jumps to zero and stalls. Also, no check engine lights appear. Any ideas? thanks, Angela
#157 of 233
Re: O2 Oxygen Sensor in 2002 Montero Sport 3.5 [johncage] by mickeymouse2
Sep 17, 2008 (9:15 pm)
Reply

Replying to: johncage (Aug 28, 2008 9:39 pm)

1)There is an emissions sticker under your hood that will say if your vehicle conforms to california or federal emissions.
2)Access from underneith the vehicle.
3)I would go with the oem replacement, it will just plug right in. The generic you have to splice your old plug and have to get the wires wired in correct.
#158 of 233
Re: 1999 Montero stalls [angelarey] by mickeymouse2
Sep 17, 2008 (9:17 pm)
Reply

Replying to: angelarey (Sep 17, 2008 7:27 pm)

First make sure you don't have a loose battery cable end. Sometimes after battery replacement the cannection may appear tight but isn't. Try to wiggle it, if it moves, it's loose.

Messages Page 16 of 24
1
...
13
14
15
16
17
18
19
...
24
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement