You are here: Forums Coupes & Convertibles Chevrolet Camaro 2nd Generation Camaro Mods

2nd Generation Camaro Mods

9 messages,  Last post on Aug 21, 2008 at 5:08 PM

You are in the Chevrolet Camaro Forum. Your Host is claires

What is this discussion about? Chevrolet Camaro

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

#4 of 9 1987 Camaro Mod by engr2go1 Jun 27, 2006 (6:34 pm)
Took a 1987 Camaro with a 305 tuned port injection and swapped it with a rebuilt 350. Kept the injection system. Bolted right on. Research shows that I have 19(?) lb injectors and need 22lb. Any advice? I have mass air and not speed density. Also, the fuel line is badly corroded. Is this an easy job to replace?
#5 of 9 late 70"s camaro power steering box[front steer] by rockingb Jul 02, 2006 (1:43 pm)
what are some OTHER CHOICES for a front steering box[smaller] camaro rack/pinion steering? s-10 box? I have a 79 camaro sub-frame on a 52 buick, the camaro has front steering and is tooo big too allow the front sheet metal to sit low enough. the radiator support rests on the top of the steering box and the radiator sits BEHIND that, so a new box of some kind is in order....would like to instal a rack/pinion set-up....any info is appreciated.....Pail
#6 of 9 Re: I highly doubt it.. [empiredj] by kolbe77 Sep 30, 2006 (4:52 pm)
Replying to: empiredj (Jan 22, 2006 10:23 pm) yes it is. the 70 front end will be shorter than the 1979 front end. you will have to replace everything including the frame itself.
#7 of 9 I need help with my 89 camaro rs by ineedhelpbad Feb 13, 2007 (9:09 pm)
I just bought my 89 camaro rs a week ago and when i go to start the car it take two to three trys to start it. It just wont turn over and i went to b&bs and they ran a error check and it said that the timing computer or somthing need to be replaced. Does anyone know what that part is and how much it is... and how much to replace it...Can anyone help me???
#8 of 9 67-68 & 69 camaro doors by rdstrrod Aug 21, 2008 (4:15 pm)
Will the doors innerchange on these years? Replies to this message: okko1 (Aug 21, 2008 5:08 pm)
#9 of 9 Re: 67-68 & 69 camaro doors [rdstrrod] by okko1 Aug 21, 2008 (5:08 pm)
Replying to: rdstrrod (Aug 21, 2008 4:15 pm) 67and 68 will 69 i don't know.

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Coupes & Convertibles Chevrolet Camaro 2nd Generation Camaro Mods